ansoft maxwell 14 不能进行非线性材料分析

zptonghua

如题！
欢迎拍砖！

forlink

Bugs fixed in Maxwell 14.0.1
ANSft00111909 - In Maxwell 14.0 the 3D magnetostatic solver was
failing on 32-bit versions of Windows when solving models with
nonlinear materials.

ANSft00113127 - In 3D Transient models with
stranded windings, applying insulating boundaries to the outside
faces of the windings could cause incorrect, non-uniform current
density in some cases.

ANSft00111335 - In Maxwell 14.0 3D Magnetostatic and 3D Transient
models with anisotropic nonlinear materials would not solve.

ANSft00109025 - Edge force density values from Maxwell2D are now
correct for edges of moving parts for 2D transient designs with
motion. [However, the visualization of the force vectors in
Maxwell's fields post processor shows the direction of the vectors
without transforming with respect to the rotation and shows the
correct direction only in the initial position.

ANSft00092048 - In Maxwell2D it is possible to use a translational
motion model with matching boundaries to emulate a wedge of a
rotating machine with very large radius (compared to the width
of the section being modeled). There was a bug leading to
incorrect results for some of these types of models.

ANSft00100030 - Maxwell 2D models with nonlinear materials in
which the BH curve extended into the 3rd quadrant would not
solve.

ANSft0011193 - The single-phase transformer model for Simplorer
created from a parametric solution in Maxwell was not correct
and would not work in Simplorer.

zptonghua

嘿嘿，我说呢，谢谢兄台

luomu

为什么有这么多bug，还不如以前版本！

forlink

maxwell的bug真是太多，强烈建议新版本不要仓促放出来，我可不喜欢当小白鼠

异乡de人

beta版还不成熟。

梦想在望

回复 2# forlink
      这里指的是磁钢的B-H曲线不支持非线性的吧？

梦想在望

回复 6# 异乡de人
     磁钢的BH曲线听说支持第三象限的，可本人试了几次，总是报BH曲线错误，高手碰到过没：

Zeus

不知道我的14.0.2能用不。

极度视界

太厉害了，总算找到出错的原因了，原来是bug啊！
ANSft00111909 - In Maxwell 14.0 the 3D magnetostatic solver was
failing on 32-bit versions of Windows when solving models with
nonlinear materials.

hscqu

maxwell的bug真是太多，强烈建议新版本不要仓促放出来，我可不喜欢当小白鼠
forlink 发表于 2011-4-4 11:17

    严重同意

chenrui

8楼你好，我对14版本的退磁有一点心的，你要是对这个感兴趣的话我们可以交流一下，我的邮箱hnuchen@163.com

chenrui

补充一下，我也遇到了你一样的问题，可以交流一下。

梦想在望

回复 5# forlink
   现在试15版本的还没报错。