looking Ansoft Permanent Magnet Material Libraries

lijo

I′am looking for the Permanent Magnet Material Libraries , they are DOWNLOADABLE FOR CUSTOMERS -- a/\/soft.com/products/em/maxwell/ (link at the bottom of page);  If someone has the libraries and would share a copy then will share with the forum
the A/\/SOFT MAXWELL V 14 beta2 w/ crk and fully stable.

wuhdli

I don't know where the link?

yao2ming

回复 1# lijo


WOo， version 14.

I'm wondering the new features and enhancements, could you please post here the release note.

Thanks.

lijo

Integration w/ new ANSYS WB 13 (now 12.1)

lijo

I don't know where the link?
wuhdli 发表于 2010-10-15 10:07

                               
登录/注册后可看大图

The link is for the Permanent Magnet Material Libraries, if you are a customer ansoft/ansys user

yao2ming

The link is for the Permanent Magnet Material Libraries, if you are a customer ansoft/ansys user
lijo 发表于 2010-10-15 21:42

                               
登录/注册后可看大图

Just release note, not to mention a beta version, don't be so closefisted. Don't worry, I won't bother you any more.

Now, I've got this software as well as the PM library. here is the release note.

1. New Features in Maxwell 14.0 Preview 2 (Beta)
   
2. =============================================
   
3. 
   
4. Improved Workbench Integration
   
5. ------------------------------
   
6. If WorkBench 13 is installed when Maxwell 14 is installed, you will now
   
7. see Maxwell2D, Maxwell3D and RMxprt show up as analysis systems in WB.
   
8. These operate much like other ANSYS products. If you edit an Maxwell
   
9. design from the WB, it will launch Maxwell in WB integration mode and
   
10. if you have setup a Maxwell design you can use "update" in WorkBench
    
11. to launch the solution.
    
12. 
    
13. Maxwell designs created in WorkBench automatically have DesignXplorer
    
14. setups created. If you designate variables as optimization variables
    
15. and/or add calculations to the DesignXplorer setup in Maxwell, a
    
16. parameters box will appear in WB. These parameters can be linked
    
17. between analysis types in WB.
    
18. 
    
19. You can import existing Maxwell projects into the WB.
    
20. 
    
21. Scripting is supported seamlessly between WB journals and Maxwell. If
    
22. you start recording a journal in WB and edit a Maxwell design, Maxwell
    
23. will begin recording it's own script. When you play back the WB journal
    
24. file it will lanch maxwell's script at the appropriate time.
    
25. 
    
26. Note that geometry cannot be linked between Maxwell and Mechanical
    
27. setups. You must export and import as before.
    
28. 
    
29. 
    
30. 
    
31. 
    
32. Other New Features or Improvements
    
33. ----------------------------------
    
34. 
    
35. Initial Mesh generation for Maxwell3D will take advantage of multiple
    
36. processors when using the default TAU mesher, a multiprocessor license
    
37. is required.
    
38. 
    
39. Force Density Vector plots are now possible in Maxwell
    
40. 
    
41. In prior versions, if you had 'dynamically update postprocessing data
    
42. for new solutions' set to "Automatically" and had reports defined, the
    
43. solution time for transient models became progressively slower with many
    
44. time steps. There should be a significant speed improvement for transient
    
45. solutions in v14 compared to v13 when using this setting.
    
46. 
    
47. Under Tools/Options Analysis Options, you can now define, save and
    
48. select between multiple distributed machine lists.
    
49. 
    
50. The distributed solve configuration should now be shared between all the
    
51. design types.
    
52. 
    
53. The RSM service options have been moved to a separate tab under general
    
54. options. This was formerly part of the analysis options tab.
    
55. 
    
56. A ruler showing the scale of the current view is now (optionally) displayed
    
57. in modeler windows.
    
58. 
    
59. Polyline with cross section now supports trapezoid cross section.

复制代码

happinessman88

My god ! v14! But I have no permanent maget Material Libraries.Can you sent V14 for me?

baohuijx

非常好的软件

lijo

I′m upload MX V14 Final to hao007.net
Server f t p : / / hao888:hao111@hao009.3322.org:2525 Incoming Folder

a9473806

I′m upload MX V14 Final to hao007.net
Server f t p : / / hao888:hao111@hao009.3322.org:2525 Incomi ...
lijo 发表于 2010-12-30 21:02

                               
登录/注册后可看大图

剛剛進入ftp
並沒有看到maxwell 14

lijo

剛剛進入ftp
並沒有看到maxwell 14
a9473806 发表于 2010-12-31 09:03

                               
登录/注册后可看大图

    Read this post: http://bbs.simol.cn/thread-60310-1-1.html

kitefs

怎么进去呀。我怎么没有找到。

nidin

ed2k://|file|Ansoft%20Maxwell%20v14%20(with%20crack).zip|357821334|1F7F5C85B4170C03E30BBC78C8A32BC9|h=VSJWXWOLUZGUKMPQ4OEKFRJWPGREIY3D|

lixuegong88

学习中，多谢

???

没有找到呢？