how can help me whit some cedrat tutorials

chrys · 发表于 2010-6-16 03:17

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

where can i get some cedrat flux 2d tutorials ?

in english pls :)

lijo · 发表于 2010-6-17 00:43

本帖最后由 lijo 于 2010-6-17 00:50 编辑

Begin w/ this
softwave.cn/pdf/DocExamples_Flux103.rar && please use the forum search button

rp2004 · 发表于 2011-5-2 00:49

thank you lijo, by the way the pills for 10.3 and 10.4 published on simol do not cure the circuit editor (one needs 10.3 or 10.4 to run the docexamples above). I noticed this with winxp_x64 installation.
Would somebody share if the pills cure the circuit editor with, say winxp_x32 or win7_x64.

lijo · 发表于 2011-5-2 02:57

本帖最后由 lijo 于 2011-5-2 03:09 编辑

V10.3.3 works fine in x32 or x64 systems with Old Flux2D Solver (legacy) and/or New Flux3D Solver and/or for example old commands-DOS-programs like modify, cslmat (Materials database), electriflux, ....

v10.4.1 works fine in x64 and new Flux3D Solver

V10.4.1 works fine in x32 systems with Old Flux2D Solver and/or New Flux3D Solver (use a VM at X64 compyuta)

Into help of Flux 10.4 see Flux2D (legacy)...... , Electriflux is a old app, Flux have over 10 years of changing the interface, the French work slowly;)

rp2004 · 发表于 2011-5-2 07:43

thank you lijo, i don't understand then.
in my case 10.4.1 installed on winxp_x64 and with the pill from
http://bbs.simol.cn/thread-66189-1-1.html
gives me a "license error" when pressing the "circuit" button. anyway..
what do you mean see Flux2d (legacy)...? I searched simol for "Flux2d (legacy)" and didn't get any entry...

lijo · 发表于 2011-5-2 21:26

Flux2D==legacy
see "Help" buttom in Flux
Use Flux V10.3.3 in X64

rp2004 · 发表于 2011-5-3 23:01

thanks lijo, 10.3.3 worked in winxp_x64 after repacing elecriflux.exe with a fixed one. Thanks again for your prompt responses. Jmag and Maxwell look however much more user friendlier and advanced than Flux.

lijo · 发表于 2011-5-4 03:58

thanks lijo, 10.3.3 worked in winxp_x64 after repacing elecriflux.exe with a fixed one. Thanks again ...
rp2004 发表于 2011-5-3 23:01

登录/注册后可看大图

No need to replace electriflux.exe
Advanced I do not think ;)

rp2004 · 发表于 2011-5-4 12:34

without replacing the electrifix.exe the "circuit"button doesn't work under winxp_x64 unfortunately. checked it on two pcs.
Don't have experience with Flux, but my first impression is not good at all. The interface looks like 5-10 years behind the others.

		自动登录	找回密码
密码			立即注册

[求助] how can help me whit some cedrat tutorials

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

评分

评分

评分