ansoft 12 在工程电磁场中应用书中的例子问题

kingg209

该书中光盘中带的例子模型为什么每次运行都得不到结果呢？总提示错误，有人遇到过吗
不是一个是全部如此。不知道是不是我的软件毛病！

sissi.q

我没有遇到这些问题啊~

farmaleo

换到英文目录。。不知道是不是这个问题！

wgs860818

我做过了 ，没什么大的问题。。。自己多做做，应该没什么问题的

kingg209

IM_eddy_analysis (EddyCurrent, XY)
    [warning] Eddy effect settings may need revisiting due to the recent changes in the design.  The default value will be used for the object if the value is not specified.  (1:31 下午  六月 12, 2010)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:31 下午  六月 12, 2010)
    [warning] Plot 'Mesh1' becomes invalid due to no available mesh. (1:31 下午  六月 12, 2010)
    [info] Normal completion of simulation on server: Local Machine. (1:32 下午  六月 12, 2010)
    [warning] Plot 'Flux_Lines1' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mag_B1' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mesh1' becomes invalid due to no available mesh. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mag_B1' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mag_B2' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mag_B2' becomes invalid due to no available solution. (1:36 下午  六月 12, 2010)
    [warning] Plot 'Mesh1' becomes invalid due to no available mesh. (1:36 下午  六月 12, 2010)
  [error] An error occurred while writing to file D:/ansoft/第四章/I_M_e_perfect.mxwl.  Is the file or directory read only? Disk Full? (1:31 下午  六月 12, 2010)
总是这个提示！

farmaleo

最后一个错误就是中文目录的事！！

farmaleo

我的电脑是能设计不能仿真，换个电脑好使的！！

海水好咸

我也遇到了这样的问题。

60851010

咋个没有高手回答呢 我的也遇到了类似的问题
打开例程，出现了警告：
dangeyongciti (E:/dangeyongciti/)
  Maxwell2DDesign1 (Magnetostatic, XY)
    [error] Simulation completed with execution error on server: Local Machine. (11:19 上午  五月 12, 2011)
    [error] Unable to write design data to temp file 'd:/我的文档/Ansoft/temp/DE6210813051703810/design.data' for COM engine. (11:19 上午  五月 12, 2011)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:19 上午  五月 12, 2011)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:21 上午  五月 12, 2011)
    [warning] Plot 'Mag_B2' becomes invalid due to no available solution. (11:24 上午  五月 12, 2011)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:24 上午  五月 12, 2011)
    [warning] Plot 'Mag_B2' becomes invalid due to no available solution. (11:24 上午  五月 12, 2011)
    [warning] Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:25 上午  五月 12, 2011)
    [warning] Plot 'Mag_B2' becomes invalid due to no available solution. (11:25 上午  五月 12, 2011)

tanping

期待高手的出现我安装后运行也这样

sdtkwgb

各位高手快来回答一下吧

yxt0536

应该就是文件输入途径中出现了汉字 稍微高级一点外国的软件都不支持汉字 建议楼主把途径中汉字去掉再试试

百兆山老张

yxt0536 发表于 2012-6-4 23:07
应该就是文件输入途径中出现了汉字 稍微高级一点外国的软件都不支持汉字 建议楼主把途径中汉字去掉再试试

问题解决，果然高手在民间，感谢了兄弟！

ntgny

请教一下：这个警告是怎样消除的？ [warning] Plot 'Mesh1' becomes invalid due to no available mesh.

guxiaoke

wgs860818 发表于 2010-6-12 14:38
我做过了 ，没什么大的问题。。。自己多做做，应该没什么问题的

请问您有ansoft12在工程电磁场中的应用的光盘文件吗

dodo123

DESIGN (D:/Ansoft Maxwell14.0/)
  Maxwell2DDesign1 (Transient, XY)
    [error] Unable to create temp directory '%1' on local machine. (3:21:56 下午  十一月 13, 2017)
    [error] Simulation completed with execution error on server: Local Machine. (3:21:57 下午  十一月 13, 2017)
    [error] Unable to create simulation working directory within temp dir: C:\Users\Administrator\AppData\Local\Temp (3:25:58 下午  十一月 13, 2017)
    [error] Unable to create temp directory '%1' on local machine. (3:25:58 下午  十一月 13, 2017)
    [error] Simulation completed with execution error on server: Local Machine. (3:25:59 下午  十一月 13, 2017)
请教大神怎么解决这错误，不止一次出现了。