SPEED2007各个模块破解版本

xanimal · 发表于 2009-5-27 19:38

楼主乃一牛人也。。。
thanks very much

bonbon · 发表于 2009-6-1 20:53

十分感谢搂主为我们破解这个软件。

summer024 · 发表于 2009-6-5 19:09

楼主确实牛，不用牢骚，我来顶顶。然后再感谢一下。
换了个系统，有点问题，浪费了点币。

cbb98 · 发表于 2009-6-26 20:48

好多层都测试通过了,晚来一步,后进啊

keykey518 · 发表于 2009-6-27 09:39

楼主有2008版的吗?真牛.您会用吗

onemilimeter · 发表于 2009-7-5 04:11

Would you please upload to rapidshare? I don't have enough 'simol credit' to download the files. Thanks.

onemilimeter · 发表于 2009-7-5 23:47

After downloading, I unzipped the RAR archives and found several folders as shown in the figure below. Then, I tried to execute "wbdc32.exe" in the PC-BDC folder. Unfortunately, I received a message prompting for lock file "SPEEDLOK.004". Could someone please advise how to install SPEED properly and do I need the lock file "SPEEDLOK.004" for the installation of SPEED? However, I could not find the lock file "SPEEDLOK.004" in the downloaded archives.

Thanks.

wydjsb1 · 发表于 2009-9-21 15:03

我用到PC-DCM模块,非常感谢!

saleing · 发表于 2009-10-11 23:10

没有安装文件了，光在破解也不行呀！哪位大大把安装文件补一下呀！

giuseppe · 发表于 2009-10-12 22:13

81# onemilimeter

I think that is the reason nobody would like to upload the original installment program, because this Lock File contains the information about the professor and the university. So it is easy to find out who shared their SPEED to be cracked.

saleing · 发表于 2009-10-19 15:33

有哪位好心人响应一下广大人民群众的需求,把安装软件再发到FTP上好不好呀.

yzhjim · 发表于 2009-10-19 23:27

楼主不用烦恼了，大家都会感激你的哦

arrowmotor · 发表于 2009-10-22 12:31

支持您的贡献。

hyx0403 · 发表于 2009-10-22 15:06

我的运行PC-FEA分析时，出现如下错误，而且已经PC-FEA55已经被crack里的覆盖了，这是怎么回事，请高手指点。
[localimg=180,93]1[/localimg]

hyx0403 · 发表于 2009-10-22 15:10

我在运行PC-FEA时，出现如下的错误提示，而且我已经将PC-FEA55文件用破解的覆盖了，这个是怎么回事，请高手指点？
[localimg=180,93]1[/localimg]

liwenliang01 · 发表于 2009-10-30 11:07

Thanks for your share!!!

jrqxiaoxue · 发表于 2009-11-8 10:17

i我爱你

paulyen · 发表于 2009-11-8 11:06

Speed 2007 at ftp now deleted by .......

pgh79 · 发表于 2009-11-13 12:37

呵呵，不知道论坛币够不够

w106 · 发表于 2009-11-24 20:44

太谢谢楼主了，中国啥时能有专门研究电机的机构？

		自动登录	找回密码
密码			立即注册

[分享] SPEED2007各个模块破解版本