- 积分
- 34613
- 回帖
- 0
- 西莫币
-
- 贡献
-
- 威望
-
- 存款
-
- 阅读权限
- 100
- 最后登录
- 1970-1-1
签到天数: 300 天 连续签到: 55 天 [LV.8]以坛为家I
|
发表于 2025-9-4 11:18
|
显示全部楼层
来自: 中国上海
本帖最后由 zengxiaodong 于 2025-9-4 11:24 编辑
What's new in Altair® FluxMotor® 2025.1
Highlights of the new version
Overview
The main information about Altair® FluxMotor® 2025.1 are described below.
For more detailed information, please refer to the user help guides. The list of documents to read is presented below.
Here are the highlights of the new version:
Flow Simulator thermal and flow solver in the back end of FluxMotor (v2025.1)
Characterization / Steady state / Transient / Fitting (SMPM / RSM / IMSQ)
Working Point - I, Ψ, N (SMPM / RSM) + U, f, N (IMSQ) - Coupled eMag ↔ Thermal computations
Efficiency map (SMPM) - Coupled eMag ↔ Thermal computations
Induction machines with vector control command
Characterization / Model / Maps
Performance mapping – Sine wave – Efficiency map
Export of LUT
Synchronous Machines – Permanent Magnets
Maps & efficiency maps with limits of temperatures
Performance of the wound field synchronous machines
Characterization – Short-circuit - Short-circuit curve
Sketcher SimLab - FluxMotor
To make the part topology definition easier
Parameterized parts (Except structural data) for SMPM – Library of slot is available in SimLab
Material management improvements
Multi-segment lamination model
Management of the stacking factor at the design stage
New Supervisor / GUI / Workflow
New connector for HyperStudy dedicated to one test of the wound field synchronous machines
The computation of a Working Point (P/Sn, Pf, U, N) – Motor or Generator operating mode
Correction of issues
All the added new features are briefly described below, followed by an update on issues and bugs.
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|