关于JMAG 电机建模

skyscraper

请问如果出现下列问题
There may be parts that interfere with the model
The model may have intersection.

CASE A. Mesh generation failed.
1. Please check for any conflicts between the following parts.
SolidID:18(MatID:18)
SolidID:40(MatID:40)
2. If there is a conflict, please resolve it.
3. If there are parts in contact with each other, make sure those parts are completely attached or leave a space between them.
4. If neither of the above works, try another healing option when reading the CAD file.
5. Please change the unit in JMAG to the original CAD data unit, and then import the data again.

CASE B. Mesh generation succeeded.
1. Please note that the geometry may have been modified automatically if the part that interferes with the model is large in volume.
要不要解决？不解决对结果有没有影响？
如果要解决，是不是要重新画图(我的电机模型是3维的)，可不可以把原来的图重新倒回到图形编辑器