kingg209 发表于 2010-6-12 13:35

ansoft 12 在工程电磁场中应用书中的例子问题

该书中光盘中带的例子模型为什么每次运行都得不到结果呢？总提示错误，有人遇到过吗
不是一个是全部如此。不知道是不是我的软件毛病！

sissi.q 发表于 2010-6-12 13:43

我没有遇到这些问题啊~

farmaleo 发表于 2010-6-12 14:25

换到英文目录。。不知道是不是这个问题！

wgs860818 发表于 2010-6-12 14:38

我做过了 ，没什么大的问题。。。自己多做做，应该没什么问题的

kingg209 发表于 2010-6-12 14:51

IM_eddy_analysis (EddyCurrent, XY)
    Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(1:31 下午六月 12, 2010)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:31 下午六月 12, 2010)
    Plot 'Mesh1' becomes invalid due to no available mesh. (1:31 下午六月 12, 2010)
    Normal completion of simulation on server: Local Machine. (1:32 下午六月 12, 2010)
    Plot 'Flux_Lines1' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Mag_B1' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Mesh1' becomes invalid due to no available mesh. (1:36 下午六月 12, 2010)
    Plot 'Mag_B1' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Mag_B2' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Mag_B2' becomes invalid due to no available solution. (1:36 下午六月 12, 2010)
    Plot 'Mesh1' becomes invalid due to no available mesh. (1:36 下午六月 12, 2010)
An error occurred while writing to file D:/ansoft/第四章/I_M_e_perfect.mxwl.Is the file or directory read only? Disk Full? (1:31 下午六月 12, 2010)
总是这个提示！

farmaleo 发表于 2010-6-12 14:58

最后一个错误就是中文目录的事！！

farmaleo 发表于 2010-6-12 14:59

我的电脑是能设计不能仿真，换个电脑好使的！！

海水好咸 发表于 2011-1-8 19:42

我也遇到了这样的问题。

60851010 发表于 2011-5-12 11:27

咋个没有高手回答呢 我的也遇到了类似的问题
打开例程，出现了警告：
dangeyongciti (E:/dangeyongciti/)
Maxwell2DDesign1 (Magnetostatic, XY)
    Simulation completed with execution error on server: Local Machine. (11:19 上午五月 12, 2011)
    Unable to write design data to temp file 'd:/我的文档/Ansoft/temp/DE6210813051703810/design.data' for COM engine. (11:19 上午五月 12, 2011)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:19 上午五月 12, 2011)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:21 上午五月 12, 2011)
    Plot 'Mag_B2' becomes invalid due to no available solution. (11:24 上午五月 12, 2011)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:24 上午五月 12, 2011)
    Plot 'Mag_B2' becomes invalid due to no available solution. (11:24 上午五月 12, 2011)
    Plot 'Flux_Lines2' becomes invalid due to no available solution. (11:25 上午五月 12, 2011)
    Plot 'Mag_B2' becomes invalid due to no available solution. (11:25 上午五月 12, 2011)

tanping 发表于 2012-5-18 21:14

期待高手的出现我安装后运行也这样

sdtkwgb 发表于 2012-5-31 19:52

各位高手快来回答一下吧

yxt0536 发表于 2012-6-4 23:07

应该就是文件输入途径中出现了汉字 稍微高级一点外国的软件都不支持汉字 建议楼主把途径中汉字去掉再试试

百兆山老张 发表于 2013-4-4 14:05

yxt0536 发表于 2012-6-4 23:07 static/image/common/back.gif
应该就是文件输入途径中出现了汉字 稍微高级一点外国的软件都不支持汉字 建议楼主把途径中汉字去掉再试试

问题解决，果然高手在民间，感谢了兄弟！

ntgny 发表于 2016-1-16 19:35

请教一下：这个警告是怎样消除的？ Plot 'Mesh1' becomes invalid due to no available mesh.

guxiaoke 发表于 2016-10-12 19:21

wgs860818 发表于 2010-6-12 14:38
我做过了 ，没什么大的问题。。。自己多做做，应该没什么问题的

请问您有ansoft12在工程电磁场中的应用的光盘文件吗

dodo123 发表于 2017-11-13 15:32

DESIGN (D:/Ansoft Maxwell14.0/)
Maxwell2DDesign1 (Transient, XY)
    Unable to create temp directory '%1' on local machine. (3:21:56 下午十一月 13, 2017)
    Simulation completed with execution error on server: Local Machine. (3:21:57 下午十一月 13, 2017)
    Unable to create simulation working directory within temp dir: C:\Users\Administrator\AppData\Local\Temp (3:25:58 下午十一月 13, 2017)
    Unable to create temp directory '%1' on local machine. (3:25:58 下午十一月 13, 2017)
    Simulation completed with execution error on server: Local Machine. (3:25:59 下午十一月 13, 2017)
请教大神怎么解决这错误，不止一次出现了。
页: [1]
查看完整版本: ansoft 12 在工程电磁场中应用书中的例子问题