zengxiaodong 发表于 2021-5-29 13:16

zengxiaodong 发表于 2021-10-5 13:49

本帖最后由 zengxiaodong 于 2021-10-5 15:49 编辑








zengxiaodong 发表于 2021-10-5 17:14

本帖最后由 zengxiaodong 于 2021-10-5 21:50 编辑

2021.1.0版的新功能：

1、增加了同步磁阻电机类型；

2、增加了异步电机的电磁噪声分析（试用）；

......


zengxiaodong 发表于 2022-3-3 09:19

baifengchuan 发表于 2022-3-3 09:48

没有安装包，没有用过！

zengxiaodong 发表于 2022-4-11 08:53

新版把Flux和FluxMotor这两个软件合并在一起了


kld 发表于 2022-9-12 13:12

曾工，AltairFluxMotor里带电机模板，可以直接打开进行TEST吗？

zengxiaodong 发表于 2023-5-15 12:57

2022.3

zengxiaodong 发表于 2024-3-3 10:23

本帖最后由 zengxiaodong 于 2024-3-3 10:24 编辑

36槽4极的单层交叉式绕组，用Motor-CAD自定义方式，费了九牛二虎之力才搞出来





但是，用Fluxmotor的专家模式，自定义方式很容易就得到了结果


nxz151204211 发表于 2024-4-22 15:46

keyi{:1_522:}{:1_542:}

zengxiaodong 发表于 2024-6-1 19:33



手册齐全。

zengxiaodong 发表于 2024-10-16 20:14

本帖最后由 zengxiaodong 于 2024-10-17 10:43 编辑




未提供38个手册文件计146MB下载

zengxiaodong 发表于 2025-9-4 11:18

本帖最后由 zengxiaodong 于 2025-9-4 11:24 编辑

What's new in Altair® FluxMotor® 2025.1
Highlights of the new version

Overview
The main information about Altair® FluxMotor® 2025.1 are described below.

For more detailed information, please refer to the user help guides. The list of documents to read is presented below.

Here are the highlights of the new version:
Flow Simulator thermal and flow solver in the back end of FluxMotor (v2025.1)
Characterization / Steady state / Transient / Fitting (SMPM / RSM / IMSQ)
Working Point - I, Ψ, N (SMPM / RSM) + U, f, N (IMSQ) - Coupled eMag ↔ Thermal computations
Efficiency map (SMPM) - Coupled eMag ↔ Thermal computations
Induction machines with vector control command
Characterization / Model / Maps
Performance mapping – Sine wave – Efficiency map
Export of LUT
Synchronous Machines – Permanent Magnets
Maps & efficiency maps with limits of temperatures
Performance of the wound field synchronous machines
Characterization – Short-circuit - Short-circuit curve
Sketcher SimLab - FluxMotor
To make the part topology definition easier
Parameterized parts (Except structural data) for SMPM – Library of slot is available in SimLab
Material management improvements
Multi-segment lamination model
Management of the stacking factor at the design stage
New Supervisor / GUI / Workflow
New connector for HyperStudy dedicated to one test of the wound field synchronous machines
The computation of a Working Point (P/Sn, Pf, U, N) – Motor or Generator operating mode
Correction of issues
All the added new features are briefly described below, followed by an update on issues and bugs.

页: 1 [2]
查看完整版本: fluxmotor有人用过吗？