ansoft求解后出现的问题
本人使用ANSOFT分析发电机,模型建立后,自检通过,但在信息管理区有红色警示“ Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)N_slot_7: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_61: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_62: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_63: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_64: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_65: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_66: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_67: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_68: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_69: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_70: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_71: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:51 上午九月 11, 2013)
Unnamed_72: CoverLine operation failed. (9:20:51 上午九月 11, 2013)
Acis error: "Fail to cover lines. The given curve is open! Make sure the curve is closed " (9:20:52 上午九月 11, 2013)
Unnamed_74: CoverLine operation failed. (9:20:52 上午九月 11, 2013)
这些“Acis error”是怎么回事?
求解开始后,马上出现更多的类似错误,并在几分钟到十几分钟后出现系统错误“2D Solver遇到问题需要关闭。”,此问题如何产生,如何解决,望高手给出答案。 另外,自检时,出现 ” Maxwell2DDesign1 (Magnetostatic, XY)
Model dimensions (6560, 13120) are beyond the expected range (1e-006, 10000).“警示语,什么是模型尺寸? 曲线没有闭合,模型太大,仔细检查模型 我是通过先在AUTODESK inventor 中画出槽型,导入到ANSOFT中,再用轴向拷贝功能顺时针拷贝6个,出问题的只有最后一个,诡异的是,我用这7个槽镜像拷贝的7个槽型,没有什么“coverline" 的问题。
关于”MODEL DIMENSION"的问题,已经搞清楚了,是与单位有关的,我用的是mm,最大尺寸不过2380,2D瞬态分析,就出现了这样的问题,好像有点不应该。改成m后,不再出现错误警示。 panyuji 发表于 2013-9-12 10:42
我是通过先在AUTODESK inventor 中画出槽型,导入到ANSOFT中,再用轴向拷贝功能顺时针拷贝6个,出问题的只 ...
一个软件对某个量的测量精度是有限的,如果两条线的端点相差0.00001mm,软件的coverlines不能识别这个,能认为它是封闭的曲线,但是mesh的就会报错,mesh能识别这个小间隙
当你把model的尺寸从mm改成了m,那么相差就是0.00000001m,软件的coverlines不能识别这个,mesh也不能识别,那软件就能仿真,就不会报错。
cad模型导入,建议输出.sat文件,不要导入线,要导入ASCII文件,具体方法可以在论坛搜索下,外部模型的导入 zptonghua 发表于 2013-9-13 14:00
一个软件对某个量的测量精度是有限的,如果两条线的端点相差0.00001mm,软件的coverlines不能识别这个, ...
队长好给力啊 mark 一下 zptonghua 发表于 2013-9-13 14:00
一个软件对某个量的测量精度是有限的,如果两条线的端点相差0.00001mm,软件的coverlines不能识别这个, ...
{:1_490:}很厉害哦。
页:
[1]