lijo 发表于 2012-8-14 20:34

#! FluxSkewed 11.1

本帖最后由 lijo 于 2012-8-14 20:40 编辑

hi all,
Someone know how put the boundary conditions (BC) in the new Flux Skewed 11.1?

Skew don't allow boundary box (BB).

Skew don't allow line regions (BCtang. or norm. flux in Flux2D with Flux3D Solver and without BB).
The project is solved without errors but the isolines don't are correct.

pat 发表于 2012-8-17 02:11

回复 1# lijo


    On really, where have you got the new version? and does "WinFluxDocExamples11.1" contains the 3D skewed motor's example? If yes, it should include the BC setting rules.

lijo 发表于 2012-8-17 02:50

bbs.simol.cn/thread-108788-1-1.html

lijo 发表于 2012-8-17 03:15

Solved.
Flux skewed make default BC (tangent)

With outer stator air:

lijo 发表于 2012-8-17 03:22

Without outer stator air

Real(A2XYZ)

lijo 发表于 2012-8-17 03:29

本帖最后由 lijo 于 2012-8-17 03:31 编辑

Real(An) no create the Isolines Why?   A 3D or 2-1/2D user expert?

lijo 发表于 2012-8-17 05:40

本帖最后由 lijo 于 2012-8-17 05:49 编辑

回复lijo


    On really, where have you got the new version? and does "WinFluxDocExamples11.1 ...
pat 发表于 2012-8-17 02:11 http://bbs.simol.cn/images/common/back.gif

as always is an older example:

#! PrefluxSkewed 9.3

ginger783 发表于 2012-8-29 15:50

thank you, I'll try this skewed

lijo 发表于 2012-12-2 16:55

TO e = mc ^ 2

Hi lijo, when I used FLUX SKEWED, a problem occured just as http://bbs.simol.cn/thread-112464-1-1.html ", the magnetic flux isolines at stator outer boundary was always be perpendicular. But in FLUX SKEWED, line region is not allowed. Can you help me? THANKS

e=mc^2 发表于 2012-12-3 21:04

in giuseppe‘s FAQ



Is it possible to plot isolines of the Magnetic vector potential (An) in Flux3D as in Flux2D?

No, it is not possible to plot isolines of An in 3D project.
Nevertheless, it is possible to plot arrows of B or H in order to have an idea of the flux lines.
页: [1]
查看完整版本: #! FluxSkewed 11.1