#! FluxSkewed 11.1

lijo · 发表于 2012-8-14 20:34

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

本帖最后由 lijo 于 2012-8-14 20:40 编辑

hi all,
Someone know how put the boundary conditions (BC) in the new Flux Skewed 11.1?

Skew don't allow boundary box (BB).

Skew don't allow line regions (BC tang. or norm. flux in Flux2D with Flux3D Solver and without BB).
The project is solved without errors but the isolines don't are correct.

pat · 发表于 2012-8-17 02:11

回复 1# lijo

On really, where have you got the new version? and does "WinFluxDocExamples11.1" contains the 3D skewed motor's example? If yes, it should include the BC setting rules.

lijo · 发表于 2012-8-17 02:50

bbs.simol.cn/thread-108788-1-1.html

lijo · 发表于 2012-8-17 03:15

Solved.
Flux skewed make default BC (tangent)

With outer stator air:

8-16-2012 9-06-54 PM.png

lijo · 发表于 2012-8-17 03:22

Without outer stator air

Real(A2XYZ)

lijo · 发表于 2012-8-17 03:29

本帖最后由 lijo 于 2012-8-17 03:31 编辑

Real(An) no create the Isolines Why? A 3D or 2-1/2D user expert?

lijo · 发表于 2012-8-17 05:40

本帖最后由 lijo 于 2012-8-17 05:49 编辑

回复 lijo

On really, where have you got the new version? and does "WinFluxDocExamples11.1 ...
pat 发表于 2012-8-17 02:11

登录/注册后可看大图

as always is an older example:

#! PrefluxSkewed 9.3

ginger783 · 发表于 2012-8-29 15:50

thank you, I'll try this skewed

lijo · 发表于 2012-12-2 16:55

TO e = mc ^ 2

Hi lijo, when I used FLUX SKEWED, a problem occured just as http://bbs.simol.cn/thread-112464-1-1.html ", the magnetic flux isolines at stator outer boundary was always be perpendicular. But in FLUX SKEWED, line region is not allowed. Can you help me? THANKS

e=mc^2 · 发表于 2012-12-3 21:04

in giuseppe‘s FAQ

Is it possible to plot isolines of the Magnetic vector potential (An) in Flux3D as in Flux2D?

No, it is not possible to plot isolines of An in 3D project.
Nevertheless, it is possible to plot arrows of B or H in order to have an idea of the flux lines.

		自动登录	找回密码
密码			立即注册

[求助] #! FluxSkewed 11.1

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子