关于Flux10.4安装后2d求解器不能用

wshf · 发表于 2011-7-1 17:05

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

本帖最后由 wshf 于 2011-7-1 17:07 编辑

使用的破解文件是论坛上的，
未命名.jpg

当点击Direct时弹出以下窗口：

点击确定后弹出如下窗口：

不知道是什么原因，还望大虾们指教

wshf · 发表于 2011-7-1 18:39

我刚在另一台电脑上安装了下，没有这样的问题，看来是系统的缘故了，郁闷哦

lijo · 发表于 2011-7-1 23:24

There is no 64bit version of legacy Flux at all, if you run Flux
at 64bit mode,the legacy solver and post are still 32bit exe file

wshf · 发表于 2011-7-2 00:15

回复 3# lijo
Thank you lijo!
But the two computers'system are both x64bit,why? How to solve this question?

lijo · 发表于 2011-7-2 06:08

本帖最后由 lijo 于 2011-7-2 06:10 编辑

Ask to dnawujun, send a private message.

And I find it very interesting to study the FLUX10.4 'settings'

on that 64-bit computer where the dnawujun crax worxs.

rp2004 · 发表于 2011-7-10 00:28

I also found that the circuit module has never worked (got the same error mesage as wshf indicated) with any of the x64 computers I tested it on.

rp2004 · 发表于 2011-8-5 22:46

dear wshf, have you managed to solve this issue?
lijo was suggesting you to contact dnawujun (why dnawujun lijo, is he the fixer of 10.4?).

Richway2011 · 发表于 2019-2-19 19:50

I have fixed it .

Richway2011 · 发表于 2019-2-19 19:51

I have fixed it .

Do you have FLux_9.2.2 ?

		自动登录	找回密码
密码			立即注册

[求助] 关于Flux10.4安装后2d求解器不能用

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

评分