各位大侠,JMAG11推出了!!

linluse · 发表于 2012-1-31 08:29

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

JMAG 11版推出了,大概看了一下官网的介绍,
主要新增亮点为嵌入整合了以往只有Studio才有的功能如Manual Mesh Modeling,Eccentricity,
新增Automatic Extruded Meshing,Extracting Data from a Result File;MpCCI interface,支援GPU分布运算
期待各位大侠的试用分享,

官网观看更新要点介绍:

flyingmind · 发表于 2012-1-31 10:50

期待早日能够下载安装文件

owennnn · 发表于 2012-1-31 18:39

Want to try it rather......

lijo · 发表于 2012-2-2 05:05

New year new stuff

error_code · 发表于 2012-2-2 14:47

牛啊。好快。等达人破解。

see9999 · 发表于 2012-2-2 21:05

期待~~~~~~

rp2004 · 发表于 2012-2-3 13:33

any links?

jitongw · 发表于 2012-2-4 02:58

Hi friends:
I never touch with JMAG before, I already use a lot time on ansoft maxwell, simplorer..
If you can tell me what's the benefits for JMAG compare to ansoft.
If it worth to learn this new stuff ?

Thank you very much any way .

jitongw · 发表于 2012-2-4 03:11

本帖最后由 jitongw 于 2012-2-4 03:15 编辑

jmag_designer11_introduction.part1.rar (2 MB, 下载次数: 18)
The file name is:
jmag_designer11_introduction.swf

Can use midia player open it

error_code · 发表于 2012-2-6 08:35

I prefer JMAG because :

1 the interface is tidy and easy to learn.
2 strongly manual mesh generation.
3 integrated basic circuit function which can meet most motor analysis.
4 completed post data output.
5 good scripts support.

rp2004 · 发表于 2012-2-6 09:19

I agree with error_code but,

Jmag's circuit editor is very basic (not sure if Jmag works reliably with PSIM and Simulink)

Jmag’s mesher is unpredictable (higher quality, finer mesh can produce complete rubbish while courser mesh gives trustful result). This doesn't happen with Maxwell.

jitongw · 发表于 2012-2-6 15:06

Thank error_code and rp2004.
I already use two days on JMAG. My feeling is it looks good for motor design and interface is much easy to learn. Result output is nice beauty and much simple.
I think the material library is worth for the future to use. I do not work on motor. I need tools
for low frequency electromagnetic transmission research. I will use some more time on these tools and find one which is better for me.
May be as : simplorer + maxwell + Simulink + ANSYS

jitongw · 发表于 2012-2-7 23:29

Sorry, I can not get it. I try to apply an evaluation version, the JMAG guy has to talk to me.
I do not like that so I decide to give up.

回复 14# WEZDAH

jason0856317 · 发表于 2012-2-17 17:06

现在只能期待有牛人破解上传了！！
想使用新版的试试看
各位牛人辛苦了

我饿高清网络高 · 发表于 2012-3-4 08:27

期待达人下载破解！！！造福国人！！！！

paulyen · 发表于 2012-3-4 15:58

Any one have jMAGv11 pls.upload to u115

我饿高清网络高 · 发表于 2012-3-5 15:03

期待中！！！！

etwew545yeryer · 发表于 2012-3-20 18:19

什么时候出来啊？？

jere · 发表于 2012-12-8 18:41

i want 11V

zzzhkkk · 发表于 2013-1-10 05:52

用这个软件几个月了，实验室花钱买的，现在苦恼speed-torque curve怎么弄。

		自动登录	找回密码
密码			立即注册

[分享] 各位大侠,JMAG11推出了!!

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

评分