ANSYS操作中“错误交流”

wddong1115

An unexpected error ( SIG$SEGV ) has occurred...  ANSYS internal data   
has been corrupted.  ANSYS is unable to recover and will terminate.  
在使用ANSYS软件，计算电磁场时，经常出现这样的错误，不知其他高手有没有遇到过，都是如何处理的啊？
交流一下，在此谢过！

toughguy1988

这是国外论坛里关于这个错误的解释，错误是间歇性的，无法避免，是ANSYS12特有的，可以用ansys其他版本来避免这个问题。下面是原来的回复：
Dear Li,

thanks for your reply.

Meanwhile i contacted also my ansys distributor, and i was told that the occured error is mainly related to memory problems in Ansys12. There is no exact workaround, because the error is intermittent. Maybe a different mesh will already solve the problem.

Obviously this kind of error occurs with Ansys12 (Workbench2) and not with Ansys11 (Workbench11). So i took the generated ds.dat from Workbench2 and solved it with classic Ansys11 without any problem. After that i read in the results file in Workbench2 for postprocessing. Nevertheless, even if this workaround helps me to solve my current problem, it would be quite annoying if this happens more often in the future.

Maybe the next Ansys release will solve the problem.
_________________
Dietmar Kolbeck

KME Germany AG & Co. KG
Engineered Products Division
Melting and Casting
Tel.: ++49 541 321 3367
Fax: ++49 541 321 83367
mailto:Dietmar.Kolbeck@kme.com

wah_zyy

我刚安装了13.0的版本，也出现了这个问题，不知道怎么办？

fanxiang

版本高低都差不多，ANSYS那么多领域的研究，只要一种就可以了