紧急求助：maxwell 12 中建立的一个band运动模型，运行出现错误

woody

我计算一个3D的瞬态场，当不加BAND的时候，可以运行，但是加上BAND之后检查的时候么有错误，但是运行的时候就运行不下去，出现的错误提示如下！请大家帮我看看是怎么回事啊！ Maxwell3DDesign1 (Transient)
    [error] Could not map middle points on the moving mesh band.  Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged. (8:00 下午  一月 19, 2010)
    [error] Simulation completed with execution error on server: Local Machine.

woody

回复 1# woody


    补充一下，我的建立的是一个相当于磁悬浮的一个模型 中间是衔铁，衔铁的两侧分别有一个磁钢和两个线圈，构成一个对称的结构！但是计算的时候总是无法运算，大家帮帮忙啊

hapsilence

我也在做这个分析呢，我是在V10中建立的，你那个band 是怎么加的啊？加Q我们交流一下吧，279695232，谢谢了

呆呆123

楼主你好，我现在也在做3D瞬态场仿真，遇到了和你一样的问题，快急死了。请问楼主是怎么解决的？不胜感激啊！！