An example to test my Cedrat Flux 2D/3D Installation

onemilimeter · 发表于 2009-7-5 06:06

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

I've installed CEDRAT.FLUX.V9.3.1 (MAGNiTUDE.Repack-Suntous). Would someone please share a working example (preferably permanent magnet brushless motor) to test if my installation is ok?
Thank you very much in advance.

zzwh · 发表于 2009-7-5 22:46

去官方网站下载example包啊
里面很多例子的

onemilimeter · 发表于 2009-7-6 06:52

去官方网站下载example包啊
里面很多例子的
zzwh 发表于 2009-7-5 22:46

登录/注册后可看大图

Which official website did you mean? Did you mean this one: http://www.magsoft-flux.com/Support/Flux/Downloads/Examples
I do not see any example there. Please advise. Thanks.

tjin · 发表于 2009-7-6 13:32

http://www.softwave.cn/download/setupFlux_10.1_DocExamples-.exe
you can have a look.

onemilimeter · 发表于 2009-7-6 18:01

http://www.softwave.cn/download/setupFlux_10.1_DocExamples-.exe
you can have a look.
tjin 发表于 2009-7-6 13:32

登录/注册后可看大图

Hi tjin, thank you very much. By the way, do you think Flux v10 examples work well in FLUX v9.3.1? Thanks.

zzwh · 发表于 2009-7-7 23:21

Many Flux v10 examples are based on the Flux 9 examples or the same as the Flux 9 examples

onemilimeter · 发表于 2009-7-8 05:13

Many Flux v10 examples are based on the Flux 9 examples or the same as the Flux 9 examples
zzwh 发表于 2009-7-7 23:21

登录/注册后可看大图

Thank you very much

hyx0403 · 发表于 2009-11-24 15:36

网站上的下载地址已经变了
http://www.softwave.cn/pdf/setupFlux_10.1_DocExamples-.exe

		自动登录	找回密码
密码			立即注册

[求助] An example to test my Cedrat Flux 2D/3D Installation

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子