comsol 代码

sunhonglie

小弟初学这个软件，论文中出现了一些代码，可是我不知道怎么用，哪位高手给指点一下
论文里写这里定义了几何形状，网格，边界条件和常数，然后保存为m-file，可是我应该怎么做才能得到这些代码？（论文里用的是femlab 2.3）

********************
From the recorded command sequence we get
Gamma{1,1} = -2*ux;
Gamma{1,2} = -(uy+vx);
Gamma{2,1} = -(vx+uy);
Gamma{2,2} = -2*vy;
Gamma{3,1} = 0;
Gamma{3,2} = 0;

F(1) = -(u*ux+v*uy+px);
F(2) = -(u*vx+v*vy+py);
F(3) = -(ux+vy);

***********************
Change the form of Gamma to match the model described
Gamma{1,1} = -2*ux+p;
Gamma{1,2} = -(uy+vx);
Gamma{2,1} = -(vx+uy);
Gamma{2,2} = -2*vy+p;
Gamma{3,1} = 0;
Gamma{3,2} = 0;


******************************
Change the form of F to match the model described
F(1) = -Re*(u*ux+v*uy) + alpha(x,y)*u;
F(2) = -Re*(u*vx+v*vy) + alpha(x,y)*v;
F(3) = ( ux+vy);
Iter  ErrEst      Damping     Stepsize nfun njac nfac nbsu
1     0.098       1.0000000    68           2     1    1     2
2     4.1e-008  1.0000000   0.0048      3     2    2     4
3     1.3e-015  1.0000000   2.9e-008   4     3    3     6