Fan Load Type

Delcev · 发表于 2017-4-9 22:52

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

How to setup in motion setup Fan Load type loading of the motor?
Fan load to be proportional to speed^2

luomu · 发表于 2017-4-12 11:25

直接写成函数，Speed就是软件内建的一个转速变量。

Delcev · 发表于 2017-4-12 14:11

I know you can choose in RMxprt for three phase Induction motor, but when exported in Maxwell 2D environment how to setup a function for the load?

zptonghua · 发表于 2017-4-12 23:08

click motion setup，look the last menu，select consider machanical，then fill in the load as Speed*speed*a，replace ‘a’ with value，
回答个问题还得打开百度翻译，这世道。。。。。。。。。。。。。2017.04.1205

Billy_Smile · 发表于 2017-5-11 16:02

well, two possible solutions may come to this problem
1.Applying Rmxprt to analysis and when it comes to the analysis setup ,you can choose the fan laod to solve this problem
2.Applying transition analysis, considering mechanical load adn then in the input load, input function just like -k*speed*speed
Either one can be fine, enjory.

		自动登录	找回密码
密码			立即注册

[Maxwell] Fan Load Type

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。