ansoft 3d瞬态分析band设置问题

zmldy · 发表于 2014-3-4 09:59

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？立即注册

x

剖分时，提示错误[error] Wrong band mesh. Suggested solutions: (1). Add the InnerRegion to wrap all moving objects. (2). Specify smaller normal deviation angle to InnerRegion (suggested angle is twice as much as band object surface). (3). If the band gap very is small, a small segment is needed for band object so that the smooth curvature can be built on band surface. (4). Band object has true surfaces, but no mesh operation or operation is too large.

免费可见

Project35.zip (1.33 MB, 下载次数: 17)

haoren001x · 发表于 2014-8-22 10:38

请问这是怎么回事呢？怎么设置呢？附件不能下载

		自动登录	找回密码
密码			立即注册

[Maxwell] ansoft 3d瞬态分析band设置问题

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。