网格划分报错

watchingu

小弟初学，请教达人，网格划分的时候报错（如下），我想应该是模型中有重叠部分，那么如何消除呢，如下图，两个面在同一平面上，怎么操作呢？谢谢。




--------------------------------------
There may be parts that interfere with the model
The model may have intersection.

CASE A. Mesh generation failed.
1. Please check for any conflicts between the following parts.
SolidID:1(MatID:0)
SolidID:11(MatID:11)
2. If there is a conflict, please resolve it.
3. If there are parts in contact with each other, make sure those parts are completely attached or leave a space between them.
4. If neither of the above works, try another healing option when reading the CAD file.
5. Please change the unit in JMAG to the original CAD data unit, and then import the data again.

CASE B. Mesh generation succeeded.
1. Please note that the geometry may have been modified automatically if the part that interferes with the model is large in volume.

lgs520yxx

检查图，不要相互重叠

watchingu

回复 2# lgs520yxx
谢谢。
我的意思是怎么操作呢？我的模型里面画了一个空气域，模型在空气里面，所以肯定是重叠的。问题是在Editor里怎么操作呢。
我感觉，他这个Geometry editor功能太弱了。

paopaoff

Jmag里没有布尔功能，不能像ansoft那样画一个大空气域与其他模型相减。