有关maxwell v12里的模型问题

tupoh

自已在2d里建模,必须用syslib里的东西吗?

有的参数没有图片不清楚是什么,永磁转子模型中,比如,V型的

Property	Description
DiaGap	Core diameter on gap side, or outer diameter
DiaYoke	Core diameter on yoke side, or inner diameter
Length	Core Length
Poles	Number of poles
PoleType	Pole Type: 1 or 3
D1	Limited diameter of PM ducts
O1	Bottom width for separate or flat-bottom duct
O2	Distance from duct bottom to shaft surface
B1	Duct thickness
Rib	Rib width
HRib	Rib height
DminMag	Minimum distance between side magnets
ThickMag	Magnet thickness
WidthMag	Total width of all magnet per pole
LenRegion	Region length
InfoCoil	0: core; 1: magnets; 2: ducts; 100: region