3D仿真出错！！求解！！

电机BOY · 发表于 2013-5-6 10:21

求大侠！！帮助解释一下原因！！检查的时候没问题！算一会就蹦出这个问题了！！

zhanggongju · 发表于 2013-6-8 11:52

我也遇到这样的问题，解决了吗？

飞飞猪 · 发表于 2013-6-8 14:20

我也遇到这个问题了！我的是3D盘式电机！双外转子加中间定子！
[error] Could not map middle points on the moving mesh band. Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged.

飞飞猪 · 发表于 2013-6-8 14:28

楼主问题解决了吗？

飞飞猪 · 发表于 2013-6-8 14:29

我的问题跟楼主的基本一样的！我的是3D盘式电机！双外转子中间定子！双band的！[error] Could not map middle points on the moving mesh band. Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged.

		自动登录	找回密码
密码			立即注册

Flux电机有限元分析教程西莫团购入口 \| 奖励入口	当当网购物入口 \| 奖励入口	欢迎使用！西莫论坛App开放下载	Motor-CAD电机多物理域设计教材购买入口 \| 奖励入口
★新会员论坛须知★	《西莫电机技术》第41期发售火热进行中	Flux电机电磁阀有限元分析教程团购入口 \| 奖励入口	论坛微信公众平台欢迎入驻
西莫电机及相关产品供需交流群开放邀请	★ 论坛VIP会员申请 ★	Motor-CAD.MANATEE电磁热振动噪声教程 \| 奖励入口	西莫团队欢迎您的加盟！
宣传推广合作请联系QQ：25941174	西莫电机论坛微信群正式开放	Flux变压器与电抗器有限元分析团购入口 \| 奖励入口	西莫电机论坛技术版区QQ群汇总

3D仿真出错！！求解！！

本帖子中包含更多资源

浏览过的版块