<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>西莫电机圈 - 『电机设计』</title>
    <link>https://bbs.simol.cn/forum-53-1.html</link>
    <description>Latest 20 threads of 『电机设计』</description>
    <copyright>Copyright(C) 西莫电机圈</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 08 May 2026 06:22:29 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://bbs.simol.cn/static/image/common/logo_88_31.gif</url>
      <title>西莫电机圈</title>
      <link>https://bbs.simol.cn/</link>
    </image>
    <item>
      <title>材料求助</title>
      <link>https://bbs.simol.cn/thread-219912-1-1.html</link>
      <description><![CDATA[有没有大佬可以分享一下钐钴材料的B-H曲线。]]></description>
      <category>『电机设计』</category>
      <author>不想学习</author>
      <pubDate>Mon, 27 Apr 2026 14:45:43 +0000</pubDate>
    </item>
    <item>
      <title>求助永磁同步电机设计问题</title>
      <link>https://bbs.simol.cn/thread-219911-1-1.html</link>
      <description><![CDATA[现在想要设计一台15kW、额定转速1500rpm、扭矩110Nm、效率92%、重量10kg以内的永磁同步电机
我选用了12槽10极，定子外径150mm，定子内径107mm，铁芯长130mm，5根φ0.67并绕20匝，节距1，绕组层数2，计算槽满率76%
电磁功率17.25kW，效率91.34%，平均转矩109.39Nm，转矩 ...]]></description>
      <category>『电机设计』</category>
      <author>李老大</author>
      <pubDate>Mon, 27 Apr 2026 09:57:15 +0000</pubDate>
    </item>
    <item>
      <title>求助   RMxprt  中 4极单相电容电机  绕组参数如何设置</title>
      <link>https://bbs.simol.cn/thread-219901-1-1.html</link>
      <description><![CDATA[各位大侠 ，请教 4极的单双层混合绕组  在RMxprt  中式如何设置的啊  ，从  Coil1  到  Coil24   里面的参数 都怎么设置，有没有大侠  帮写出来  ？   定子 24槽     4极电机]]></description>
      <category>『电机设计』</category>
      <author>jjluhonglin</author>
      <pubDate>Sun, 26 Apr 2026 08:39:14 +0000</pubDate>
    </item>
    <item>
      <title>正弦充磁</title>
      <link>https://bbs.simol.cn/thread-219848-1-1.html</link>
      <description><![CDATA[看到了很多磁环径向正弦充磁的案例，想请问为什么没有盘式电机轴向磁环正弦充磁的设置方式呢，是因为这种结构不能用吗？]]></description>
      <category>『电机设计』</category>
      <author>happyy</author>
      <pubDate>Wed, 15 Apr 2026 02:40:32 +0000</pubDate>
    </item>
    <item>
      <title>自启动永磁同步电机中转子无法增加转子槽</title>
      <link>https://bbs.simol.cn/thread-219807-1-1.html</link>
      <description><![CDATA[RMxprtk 自启动永磁同步电机中转子无法右键增加转子槽


目前2024、2025、2026均无法增加]]></description>
      <category>『电机设计』</category>
      <author>cqj76</author>
      <pubDate>Mon, 06 Apr 2026 13:56:12 +0000</pubDate>
    </item>
    <item>
      <title>求程序输入输出说明</title>
      <link>https://bbs.simol.cn/thread-219751-1-1.html</link>
      <description><![CDATA[EINGABEDATEN     DATUM  2026/0325  ZEIT           / RECHNUNGSVARIANTE   1
\'UFJ450-4\'                                     2010-4-6           M        1AE05
1.       355.     10000.   10.      50.      4.       720.     0.9500      2    
749.     475.]]></description>
      <category>『电机设计』</category>
      <author>yinduhua</author>
      <pubDate>Wed, 25 Mar 2026 07:20:22 +0000</pubDate>
    </item>
    <item>
      <title>高性能电机轴承失效分析</title>
      <link>https://bbs.simol.cn/thread-219628-1-1.html</link>
      <description><![CDATA[在追求高功率密度与极速转动（High RPM）的现代电机设计中，轴承往往是“最强链条中最薄弱的一环”。据统计，超过 50% 的电机故障源于轴承失效。本文将针对精密轴承（如 MF106ZZ 系列）在实际工况中的典型失效模式进行深度剖析。

​一、 典型失效模式及其机理分析

​1 ...]]></description>
      <category>『电机设计』</category>
      <author>PJB特种轴承</author>
      <pubDate>Mon, 09 Mar 2026 02:51:57 +0000</pubDate>
    </item>
    <item>
      <title>前几天有个讨论横向磁通的电机帖子，属实有点疑惑</title>
      <link>https://bbs.simol.cn/thread-219559-1-1.html</link>
      <description><![CDATA[什么径向磁通，轴向磁通，想来应该是以电磁线圈轴线命名，这个横向磁通着实有些抽象！我觉得横向磁通电机应该长这个样子，这个是定义，转子是四面磁场]]></description>
      <category>『电机设计』</category>
      <author>原能</author>
      <pubDate>Sun, 22 Feb 2026 11:13:47 +0000</pubDate>
    </item>
    <item>
      <title>横向磁通电机</title>
      <link>https://bbs.simol.cn/thread-219531-1-1.html</link>
      <description><![CDATA[目前市面上听到的有径向磁通、横向磁通电机，但最近听说一种横向磁通电机将要进军机器人领域，这我可是第一次听说啊，有资料说横向磁通电机扭矩密度可以达到传统电机的10倍，欢迎论坛的大师讨论并普及下横向磁通电机的原理，为什么它能做到那么高的扭矩密度？它的优劣势 ...]]></description>
      <category>『电机设计』</category>
      <author>284874509</author>
      <pubDate>Tue, 10 Feb 2026 12:58:38 +0000</pubDate>
    </item>
    <item>
      <title>高转速电机选异步和永磁同步哪个好</title>
      <link>https://bbs.simol.cn/thread-219517-1-1.html</link>
      <description><![CDATA[160kw三相交流电机，10000r/min，选异步和永磁同步哪个好，各有什么优缺点？]]></description>
      <category>『电机设计』</category>
      <author>hbzzk</author>
      <pubDate>Fri, 06 Feb 2026 05:48:13 +0000</pubDate>
    </item>
    <item>
      <title>Motorcad热仿真</title>
      <link>https://bbs.simol.cn/thread-219501-1-1.html</link>
      <description><![CDATA[哪位大佬知道这里具体含义吗？]]></description>
      <category>『电机设计』</category>
      <author>擎天柱</author>
      <pubDate>Sat, 31 Jan 2026 16:12:27 +0000</pubDate>
    </item>
    <item>
      <title>maxwell和simplorer联合仿真怎么解决断网继续仿真</title>
      <link>https://bbs.simol.cn/thread-219451-1-1.html</link>
      <description><![CDATA[在做联仿时发现会自动停止，次数多了就发现是网络波动导致的，主机连的wifi，每次网络消失就自动停止了，有时候跑了好久的结果还得重新开始跑，simplorer不能继续接着之前的结果跑。请问有办法解决断网就停止这个问题吗？ ...]]></description>
      <category>『电机设计』</category>
      <author>落花似流水</author>
      <pubDate>Wed, 21 Jan 2026 03:16:43 +0000</pubDate>
    </item>
    <item>
      <title>轴向磁通电机的应用及优缺点讨论</title>
      <link>https://bbs.simol.cn/thread-219444-1-1.html</link>
      <description><![CDATA[轴向磁通电机凭借高功率密度、高效率、结构紧凑等优势，已成为新能源汽车、人形机器人、电动飞行器等领域的关键动力部件。
其主流类型（双转子单定子、单转子双定子）解决了传统电机的痛点（如单边磁拉力、扭矩密度低），而新型结构（PCB、无轭定子）进一步提升了性能。 ...]]></description>
      <category>『电机设计』</category>
      <author>fullingmotor</author>
      <pubDate>Tue, 20 Jan 2026 01:07:39 +0000</pubDate>
    </item>
    <item>
      <title>电机设计#电机绕线方式探究#</title>
      <link>https://bbs.simol.cn/thread-219409-1-1.html</link>
      <description><![CDATA[大家好：

各位前辈，我刚学电机，之前是电机小白，想问问，下边的照片是不是三角型连接，并联2支路，绕线旋转角度为180°。

谢谢]]></description>
      <category>『电机设计』</category>
      <author>赵子龙</author>
      <pubDate>Tue, 13 Jan 2026 08:17:33 +0000</pubDate>
    </item>
    <item>
      <title>空心杯绕组报错不知道怎么解决</title>
      <link>https://bbs.simol.cn/thread-219367-1-1.html</link>
      <description><![CDATA[空心杯绕组报错不知道怎么解决]]></description>
      <category>『电机设计』</category>
      <author>Sean2028</author>
      <pubDate>Sun, 04 Jan 2026 12:02:16 +0000</pubDate>
    </item>
    <item>
      <title>双层2并绕，23匝数的的绕线参数在motorcad和rmxprt算出来差别太大</title>
      <link>https://bbs.simol.cn/thread-219275-1-1.html</link>
      <description><![CDATA[双层2并绕，23匝数的的绕线参数在motorcad和rmxprt算出来差别太大了，rmxprt超了100%，请大佬解惑  。



附上定子的数据：
 STATOR DATA 

Number of Stator Slots:        18
Outer Diameter of Stator (mm):          102.5
Inner Diameter of Stator (mm):          ...]]></description>
      <category>『电机设计』</category>
      <author>w443523235</author>
      <pubDate>Sun, 21 Dec 2025 10:55:48 +0000</pubDate>
    </item>
    <item>
      <title>基础知识看是否有需要的</title>
      <link>https://bbs.simol.cn/thread-218520-1-1.html</link>
      <description><![CDATA[正弦绕组基础知识看是否有需要的拿走]]></description>
      <category>『电机设计』</category>
      <author>lee001_78</author>
      <pubDate>Thu, 20 Nov 2025 05:35:07 +0000</pubDate>
    </item>
    <item>
      <title>特殊工作制电机优化方法</title>
      <link>https://bbs.simol.cn/thread-218499-1-1.html</link>
      <description><![CDATA[一般电机转矩：T  ∝ (NI)⋅Φ
即T正比于安匝数和主磁通;

而我们电机设计中电机的公式：
T ∝ D^2L⋅A⋅B
即T正比于电机体积、电负荷和磁负荷，而其中电负荷：
A= 2mNI/πD
所以将其中的安匝数NI提取出来，剩下的参数都和电机主磁通Φ有关，或者说除了NI，剩下的都用来 ...]]></description>
      <category>『电机设计』</category>
      <author>yeleaf</author>
      <pubDate>Tue, 18 Nov 2025 08:23:53 +0000</pubDate>
    </item>
    <item>
      <title>盘式电机在人形关节模组中的应用</title>
      <link>https://bbs.simol.cn/thread-218413-1-1.html</link>
      <description><![CDATA[最近炒的比较热的人形关节模组电机，之前都是用无框电机（定子+转子分体式结构）。目前很多企业在研究将盘式电机用于人形关节模组中，盘式电机在关节模组中的优势是不是很明显呢？该种电机会成为一种主流的技术趋势吗？ ...]]></description>
      <category>『电机设计』</category>
      <author>chen20021865</author>
      <pubDate>Tue, 04 Nov 2025 12:12:48 +0000</pubDate>
    </item>
    <item>
      <title>磁齿轮的相关问题</title>
      <link>https://bbs.simol.cn/thread-218319-1-1.html</link>
      <description><![CDATA[磁齿轮的静态仿真跟动态仿真是怎么做的啊？
我看论文里都说加负载，应该怎么加啊？加的负载单位是Nm，都没找到在哪里加]]></description>
      <category>『电机设计』</category>
      <author>啷个哩个啷</author>
      <pubDate>Tue, 28 Oct 2025 02:14:29 +0000</pubDate>
    </item>
  </channel>
</rss>