<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>西莫电机圈 - 〖有刷直流电机〗</title>
    <link>https://bbs.simol.cn/forum-213-1.html</link>
    <description>Latest 20 threads of 〖有刷直流电机〗</description>
    <copyright>Copyright(C) 西莫电机圈</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 14 Jul 2026 21:38:44 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://bbs.simol.cn/static/image/common/logo_88_31.gif</url>
      <title>西莫电机圈</title>
      <link>https://bbs.simol.cn/</link>
    </image>
    <item>
      <title>RMxprtPMDC设计时Stator为什么要指定材质，它和Pole有啥区别？</title>
      <link>https://bbs.simol.cn/thread-219962-1-1.html</link>
      <description><![CDATA[RMxprtPMDC设计时Stator为什么要指定材质，它和Pole有啥区别？]]></description>
      <category>〖有刷直流电机〗</category>
      <author>ghcj007</author>
      <pubDate>Tue, 05 May 2026 07:43:58 +0000</pubDate>
    </item>
    <item>
      <title>在Maxwell 2D的电机仿真中如何自己搭建H桥电路</title>
      <link>https://bbs.simol.cn/thread-219464-1-1.html</link>
      <description><![CDATA[请问各位如何在2D的电路中自己搭建H桥电路，求详细的说明及步骤，万分感谢]]></description>
      <category>〖有刷直流电机〗</category>
      <author>chris_deng</author>
      <pubDate>Fri, 23 Jan 2026 09:33:03 +0000</pubDate>
    </item>
    <item>
      <title>三相12槽10极外转子无刷电机采用集中绕组，霍尔位置怎么摆放？</title>
      <link>https://bbs.simol.cn/thread-219419-1-1.html</link>
      <description><![CDATA[各位大佬，三相12槽10极外转子无刷电机采用集中绕组，三角形接法，霍尔位置怎么摆放？小白一个]]></description>
      <category>〖有刷直流电机〗</category>
      <author>井底的蛙</author>
      <pubDate>Thu, 15 Jan 2026 09:37:24 +0000</pubDate>
    </item>
    <item>
      <title>有刷空心杯电机仿真--7槽2极</title>
      <link>https://bbs.simol.cn/thread-219372-1-1.html</link>
      <description><![CDATA[有刷空心杯电机仿真--7槽2极，下面力矩波动感觉有点大，那位干过的帮忙评估一下是否正确。外径25mm，叠厚30mm]]></description>
      <category>〖有刷直流电机〗</category>
      <author>Sean2028</author>
      <pubDate>Mon, 05 Jan 2026 07:07:40 +0000</pubDate>
    </item>
    <item>
      <title>有刷空心杯电机分析此处反电势异常波动</title>
      <link>https://bbs.simol.cn/thread-219355-1-1.html</link>
      <description><![CDATA[有刷空心杯电机分析此处反电势异常波动是怎么引起的？]]></description>
      <category>〖有刷直流电机〗</category>
      <author>Sean2028</author>
      <pubDate>Wed, 31 Dec 2025 04:33:20 +0000</pubDate>
    </item>
    <item>
      <title>关于有刷空心杯电机绕组疑问</title>
      <link>https://bbs.simol.cn/thread-218554-1-1.html</link>
      <description><![CDATA[外行学电机，向大家请教一下，像图片中的这种7个线圈和13个线圈的有刷空心杯绕组，如果是一对碳刷，那每次碳刷导通几个线圈呢？我自己分析的是7个线圈导通三个，13个线圈导通6个，不知道对不对。 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>520simol</author>
      <pubDate>Mon, 24 Nov 2025 13:53:25 +0000</pubDate>
    </item>
    <item>
      <title>2D中转子斜槽的问题</title>
      <link>https://bbs.simol.cn/thread-218322-1-1.html</link>
      <description><![CDATA[最近在搞一个斜槽的项目，在2D中设置了转子斜槽的相关参数，但是生成3D后仍然是直槽，请问大家有没有碰到过，是软件本身有bug吗？ RM中如果设计了斜槽生成的3D就没有这样的问题]]></description>
      <category>〖有刷直流电机〗</category>
      <author>chris_deng</author>
      <pubDate>Tue, 28 Oct 2025 08:53:37 +0000</pubDate>
    </item>
    <item>
      <title>直流有刷电机电机虚槽数1改为2后，实际和模拟的不对</title>
      <link>https://bbs.simol.cn/thread-217897-1-1.html</link>
      <description><![CDATA[有一台80V直流有刷电机，虚槽数=1即换向器槽数和转子槽数相同，绕线方案如图

虚槽数改为2后即换向器槽数是转子槽数的两倍实际绕线方案如图

但是RM仿真结果如图
这是绕线参数设置

这个仿真结果

但是如果仿真参数修改为34匝如图

仿真结果

总结一下，实际用的是24匝 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>weilai7161</author>
      <pubDate>Tue, 12 Aug 2025 02:26:14 +0000</pubDate>
    </item>
    <item>
      <title>直流有刷电机外径Φ38左右 13槽 转子怎么绕线</title>
      <link>https://bbs.simol.cn/thread-217854-1-1.html</link>
      <description><![CDATA[目测电机是印度TVS做的  定子4磁铁  2碳刷90° 工艺有点像嵌线转子波绕类型，  转子包裹太严实，看是叠绕的    估计是双层的  但做设备的厂家说是单叠的不能用常规双飞叉绕线机做，请问高手些这种奇数槽的转子能否用双飞实现绕制，单叠单飞肯定可以绕制。 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>老男孩</author>
      <pubDate>Tue, 05 Aug 2025 08:15:02 +0000</pubDate>
    </item>
    <item>
      <title>电压比较高的永磁直流有刷电机转子绕组图什么画</title>
      <link>https://bbs.simol.cn/thread-217777-1-1.html</link>
      <description><![CDATA[我是一台80V的永磁直流有刷电机电机，转子片槽数和换向器槽数一样，线径0.42，转子绕线如图，

 由于电压比较高，换向器容易烧掉，现改为换向器槽数为转子槽数的2倍，电机性能不变的情况下 ，这个转子绕线图怎么画？第一次接触，有大神指导一下 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>weilai7161</author>
      <pubDate>Wed, 23 Jul 2025 10:37:00 +0000</pubDate>
    </item>
    <item>
      <title>效率曲线怎么前移？</title>
      <link>https://bbs.simol.cn/thread-217673-1-1.html</link>
      <description><![CDATA[永磁有刷直流电机，在转子片不变的情况下，电机在额定转速和扭矩不变的情况下，线径是变大还是变小，匝数是变大还是变小，叠高是变大还是变小可以使电机的效率前移？如图

有大神指导一下吗？ ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>weilai7161</author>
      <pubDate>Tue, 08 Jul 2025 06:44:50 +0000</pubDate>
    </item>
    <item>
      <title>分享点永磁有刷的文章吧</title>
      <link>https://bbs.simol.cn/thread-217350-1-1.html</link>
      <description><![CDATA[感觉有刷电机虽然老掉牙了，但是仿真方法却很少见，有点头大。]]></description>
      <category>〖有刷直流电机〗</category>
      <author>蜗牛也很牛</author>
      <pubDate>Sun, 25 May 2025 13:39:06 +0000</pubDate>
    </item>
    <item>
      <title>有刷直流电机的等效电阻</title>
      <link>https://bbs.simol.cn/thread-217166-1-1.html</link>
      <description><![CDATA[哪位大侠能把2&amp;3节点的等效电阻求出来？感谢。]]></description>
      <category>〖有刷直流电机〗</category>
      <author>小虬龙</author>
      <pubDate>Sat, 03 May 2025 04:26:43 +0000</pubDate>
    </item>
    <item>
      <title>48V有刷直流电机的可行性方案</title>
      <link>https://bbs.simol.cn/thread-216567-1-1.html</link>
      <description><![CDATA[最近接到粮食公司的一个新项目，客户要求尽量在原来的电机平台上改电压到48V
原电机性能参数：
                         工作电压13.5VDC，空载电流1.5A，空载转速4500rpm，堵转转矩0.3Nm，堵转电流13A Max
                         4极10槽，机壳外径32mm，电枢外径2 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>13410311785</author>
      <pubDate>Thu, 13 Feb 2025 13:39:42 +0000</pubDate>
    </item>
    <item>
      <title>探讨交转直有刷电机碳刷磨损不一致问题</title>
      <link>https://bbs.simol.cn/thread-216519-1-1.html</link>
      <description><![CDATA[电机：230VAC/50Hz用整流器转成直流电，250W、4000rpm。电机单方向CW运转，新电机的电火花很小，大约是1 1/4程度。
寿命试验带载额定电压下，跑359h停转，经检查电机其余部分无问题，正极碳刷磨损1.1mm，负极碳刷磨损11.4mm，弹簧弹力已不足以保证其良好压紧换向器。

 ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>18767162048</author>
      <pubDate>Wed, 05 Feb 2025 07:33:45 +0000</pubDate>
    </item>
    <item>
      <title>直流电机设计</title>
      <link>https://bbs.simol.cn/thread-215691-1-1.html</link>
      <description><![CDATA[各位大佬，想请问下直流电机换向器长度一般是怎么设计的，片数的话是和电枢槽数相同；还有碳刷的数目一般怎么确定，为了降低火花除了在材料上进行选择，在碳刷与换向器接触的那一面有没有什么设计的方法？ ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>xshxsh</author>
      <pubDate>Thu, 26 Sep 2024 14:21:11 +0000</pubDate>
    </item>
    <item>
      <title>测功机国家标准</title>
      <link>https://bbs.simol.cn/thread-215489-1-1.html</link>
      <description><![CDATA[收集多年的标准，分享出来，一次搞定，不用天天网上找了]]></description>
      <category>〖有刷直流电机〗</category>
      <author>dthdth</author>
      <pubDate>Sat, 31 Aug 2024 01:11:11 +0000</pubDate>
    </item>
    <item>
      <title>直流电机555电机建模</title>
      <link>https://bbs.simol.cn/thread-215488-1-1.html</link>
      <description><![CDATA[这是一个初步的3D图，从初学者参考。]]></description>
      <category>〖有刷直流电机〗</category>
      <author>dthdth</author>
      <pubDate>Sat, 31 Aug 2024 01:05:24 +0000</pubDate>
    </item>
    <item>
      <title>出现这个错误怎样解决？</title>
      <link>https://bbs.simol.cn/thread-215289-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>〖有刷直流电机〗</category>
      <author>wcgg</author>
      <pubDate>Wed, 31 Jul 2024 02:07:25 +0000</pubDate>
    </item>
    <item>
      <title>磁铁退磁温度受矫顽力影响吗</title>
      <link>https://bbs.simol.cn/thread-215157-1-1.html</link>
      <description><![CDATA[大家好，请教一下，现有一款直流电机，对其进行-40℃低温退磁，结果试验前后数据差异较大，随后对磁钢的矫顽力进行了提升，可试验的结果还是不行，我又看了矫顽力的定义，说是反向充磁时的磁场强度，那是不是说矫顽力的值不影响退磁温度？ ...]]></description>
      <category>〖有刷直流电机〗</category>
      <author>1878813141</author>
      <pubDate>Thu, 11 Jul 2024 06:03:58 +0000</pubDate>
    </item>
  </channel>
</rss>