<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>西莫电机圈 - 『电机技术综合讨论区』</title>
    <link>https://bbs.simol.cn/forum-177-1.html</link>
    <description>Latest 20 threads of 『电机技术综合讨论区』</description>
    <copyright>Copyright(C) 西莫电机圈</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 23 Oct 2026 12:38:19 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://bbs.simol.cn/static/image/common/logo_88_31.gif</url>
      <title>西莫电机圈</title>
      <link>https://bbs.simol.cn/</link>
    </image>
    <item>
      <title>AI蓬勃发展在今天，你要怎么应对？</title>
      <link>https://bbs.simol.cn/thread-220908-1-1.html</link>
      <description><![CDATA[AI蓬勃发展到今天，无论在工作还是在生活中，AI涉及和参与的内容也越来越多了 ，你要怎么应对呢？]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>y1949b</author>
      <pubDate>Wed, 21 Oct 2026 00:54:16 +0000</pubDate>
    </item>
    <item>
      <title>关于齿部磁密</title>
      <link>https://bbs.simol.cn/thread-220890-1-1.html</link>
      <description><![CDATA[请教下各位大佬：
内置式spoke径向磁通永磁同步电机，使用电流源激励进行负载仿真，分别使用10A、20A，仿真结果齿部磁密20A的反而要小，这是为啥呢？  （磁密在1.5T以下，也没有饱和）]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>646719004</author>
      <pubDate>Fri, 16 Oct 2026 06:25:27 +0000</pubDate>
    </item>
    <item>
      <title>maxwell2D仿真电流激励，结果不太对</title>
      <link>https://bbs.simol.cn/thread-220879-1-1.html</link>
      <description><![CDATA[内嵌式电机电流激励，扭矩波形不太对，请大家帮忙看看哪可能存在问题，非常感谢！]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>zyn123</author>
      <pubDate>Thu, 15 Oct 2026 06:12:59 +0000</pubDate>
    </item>
    <item>
      <title>电机SVPWM控制的原理</title>
      <link>https://bbs.simol.cn/thread-220801-1-1.html</link>
      <description><![CDATA[空间电压矢量法和三角载波法不同，SVPWM从交流电动机的工作特点出发，基于如何使交流电动机获得幅值恒定的圆形磁通链轨迹，即正弦磁通链轨迹，是SPWM和交流电动机磁通链轨迹直接组合的一种PWM控制方法，是以三相对称正弦波电压供电时，交流电动机的理想磁通链的圆形轨迹 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>乱世煮酒论天下</author>
      <pubDate>Thu, 24 Sep 2026 08:39:44 +0000</pubDate>
    </item>
    <item>
      <title>特斯拉的无稀土电机会不会影响新能源汽车的技术路线？</title>
      <link>https://bbs.simol.cn/thread-220766-1-1.html</link>
      <description><![CDATA[首先，这个消息保真吗？毕竟马老板有时候会大嘴巴，且不是直接搞技术的。
欢迎大家分享可靠性信息，弥补X账号的那张模糊的图片和几十个字的陈述。

其次，目前各大自媒体和博主们大多猜测的是铁氮永磁体或者铁氧体永磁体取代稀土永磁体材料，那么这有可能影响未来的新能 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>pat</author>
      <pubDate>Tue, 15 Sep 2026 09:51:41 +0000</pubDate>
    </item>
    <item>
      <title>AI时代，作为工程师（技术人员）怎么平衡提高效率和个人不被替代之间的关系</title>
      <link>https://bbs.simol.cn/thread-220743-1-1.html</link>
      <description><![CDATA[AI时代，技术手段变革工作底层逻辑的同时，提升生产力效率和人的不可替代性有天然的联系，

讨论一下这个矛盾大家是怎么看待的，或者有哪些想法。


另外，每个人所处领域不同，各自领域AI介入之后有哪些底层的改变呢 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>快捷方式007</author>
      <pubDate>Thu, 10 Sep 2026 10:25:54 +0000</pubDate>
    </item>
    <item>
      <title>BLDC电机噪声问题</title>
      <link>https://bbs.simol.cn/thread-220734-1-1.html</link>
      <description><![CDATA[问题描述：将12槽10极的BLDC外转子电机，改为12槽14极BLDC外转子电机，电机PCBA的霍尔位置夹角从120/5=24°机械角改为120/7-17.14°机械角；14极的电机运行在低速一档1800rpm时出现沙沙的声音，尤其刚启动的瞬间非常明显的噪声，在高转速五档300rpm反而减小；12槽10电机 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>酥肉</author>
      <pubDate>Wed, 09 Sep 2026 01:49:09 +0000</pubDate>
    </item>
    <item>
      <title>振动电机维修求助</title>
      <link>https://bbs.simol.cn/thread-220643-1-1.html</link>
      <description><![CDATA[大家有谁知道 XV50‑6 振动电机，3.7kW，绕组技术数据和绝缘等级啊？]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>245</author>
      <pubDate>Wed, 19 Aug 2026 06:56:02 +0000</pubDate>
    </item>
    <item>
      <title>机器人关节模组的电流密度和线负荷热负荷</title>
      <link>https://bbs.simol.cn/thread-220583-1-1.html</link>
      <description><![CDATA[想请教一下论坛的前辈，机器人关节不同散热方式对应的电流密度线负荷还有热负荷的取值范围，主要是腕关节肘关节还有胯关节]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>xiaoyuan..</author>
      <pubDate>Wed, 05 Aug 2026 02:55:55 +0000</pubDate>
    </item>
    <item>
      <title>电机汝铁硼磁铁用什么胶水</title>
      <link>https://bbs.simol.cn/thread-220564-1-1.html</link>
      <description><![CDATA[大家有什么好的胶水推荐吗？主要用于贴电机转子，直线电机定子，海尔贝克磁铁安装。   要求粘接强度高，温度能到100---120左右，固化时间3-30分种都能接受，（主要是稳定，强度好，能用于批量生产）。
看网上比较多的是乐泰AA326加促进剂。这款326没用过不知道具 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>wggje</author>
      <pubDate>Thu, 30 Jul 2026 08:10:40 +0000</pubDate>
    </item>
    <item>
      <title>这个是什么</title>
      <link>https://bbs.simol.cn/thread-220423-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>原能</author>
      <pubDate>Mon, 13 Jul 2026 00:51:36 +0000</pubDate>
    </item>
    <item>
      <title>淘到一个宝贝</title>
      <link>https://bbs.simol.cn/thread-220291-1-1.html</link>
      <description><![CDATA[淘到一个宝贝，不知道怎么用本身的驱动让它转起来，蓝线和棕线应该不是pwm输入线，我试了下，转不起来]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>原能</author>
      <pubDate>Fri, 10 Jul 2026 13:21:37 +0000</pubDate>
    </item>
    <item>
      <title>三相异步电动机电压波动对功率影响。</title>
      <link>https://bbs.simol.cn/thread-220239-1-1.html</link>
      <description><![CDATA[三相异步电动机驱动水泵，要求电源电压与额定值（AC380V/50Hz）偏差不超过10%时输出功率维持额定值。这可以做到吗？]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>hbzzk</author>
      <pubDate>Wed, 01 Jul 2026 09:59:11 +0000</pubDate>
    </item>
    <item>
      <title>AI对电机行业最大的影响会发生在哪里：设计、控制、制造？</title>
      <link>https://bbs.simol.cn/thread-220203-1-1.html</link>
      <description><![CDATA[如题，想和大家一起探讨下]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>heguojia</author>
      <pubDate>Mon, 29 Jun 2026 13:27:45 +0000</pubDate>
    </item>
    <item>
      <title>三相异步电动机最小转矩和最大转矩的测试方法</title>
      <link>https://bbs.simol.cn/thread-220170-1-1.html</link>
      <description><![CDATA[哪位有三相异步电动机详细的最小转矩和最大转矩的测试方法、操作步骤啊]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>hbzzk</author>
      <pubDate>Fri, 26 Jun 2026 09:52:44 +0000</pubDate>
    </item>
    <item>
      <title>谈谈AI在电机电磁方面工作的理解</title>
      <link>https://bbs.simol.cn/thread-220139-1-1.html</link>
      <description><![CDATA[最近公司拉了好些个软件开发供应商 来交流 目的是为了提高电磁仿真的效率  一方面是想更快出方案 另一方面可能也是为了节省人力 谈谈我对AI在电磁工作方面的理解：

(1) 电磁工程师不仅仅是要会算方案 设计方案 会优化方案 更重要的是 当你给出了 外特性 效率等关键电磁 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>Roy_jxust</author>
      <pubDate>Wed, 17 Jun 2026 15:57:21 +0000</pubDate>
    </item>
    <item>
      <title>永磁同步电机设计</title>
      <link>https://bbs.simol.cn/thread-220083-1-1.html</link>
      <description><![CDATA[现在有个需求，定子外径设计在200mm以内，额定转速4000rpm以内就行，想问下大家有没有什么推荐的槽极配合，要做成风冷电机，想问下额定电密做到什么规格合适，目前做的一个36s8p电机，但不是集中绕组，我的理解是这种规格的电机是不是不需要集中绕组也能做，谢谢大家的 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>zhaojianwei</author>
      <pubDate>Mon, 01 Jun 2026 00:55:36 +0000</pubDate>
    </item>
    <item>
      <title>用AI技术设计电机，能大力推广吗？</title>
      <link>https://bbs.simol.cn/thread-220029-1-1.html</link>
      <description><![CDATA[随着AI技术的兴起，AI开始涉及到每一个工程领域，大家觉得用AI技术设计电机，能大力推广吗？]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>IPM马达</author>
      <pubDate>Tue, 19 May 2026 11:21:25 +0000</pubDate>
    </item>
    <item>
      <title>什么情况下降低输入电流和转速，能提高转矩呢？</title>
      <link>https://bbs.simol.cn/thread-220015-1-1.html</link>
      <description><![CDATA[各位好，我目前在做一个12槽10极的内置式永磁同步电机仿真，现在出现仿真与实验不相符的情况。

额定工况4500rpm时，实验数据和我的仿真结果是对的上，后续实验组的反馈数据，降低转速，降低电流，能提高转矩。我不太理解其中原因，降低电流不应该转矩也跟着一起降低吗 ...]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>pinorvermel</author>
      <pubDate>Sun, 17 May 2026 09:10:04 +0000</pubDate>
    </item>
    <item>
      <title>Motor-CAD 研讨会资料</title>
      <link>https://bbs.simol.cn/thread-219988-1-1.html</link>
      <description><![CDATA[Motor-CAD 研讨会资料]]></description>
      <category>『电机技术综合讨论区』</category>
      <author>韦136</author>
      <pubDate>Wed, 13 May 2026 00:08:06 +0000</pubDate>
    </item>
  </channel>
</rss>