<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>西莫电机圈 - 〖MATLAB/Simulink资源中心〗</title>
    <link>https://bbs.simol.cn/forum-115-1.html</link>
    <description>Latest 20 threads of 〖MATLAB/Simulink资源中心〗</description>
    <copyright>Copyright(C) 西莫电机圈</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 14 Jul 2026 21:35:14 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://bbs.simol.cn/static/image/common/logo_88_31.gif</url>
      <title>西莫电机圈</title>
      <link>https://bbs.simol.cn/</link>
    </image>
    <item>
      <title>电机simulink建模</title>
      <link>https://bbs.simol.cn/thread-215451-1-1.html</link>
      <description><![CDATA[大佬们好，我现在有一个实物电机，现在已经在maxwell建立好模型了，但是仿真需要高版本的simulink，maxwell和simulink不能联合仿真。针对这个问题，我想问一下，在simulink里面怎么样设置电机比较准确？用等效电路么？还是有什么其他的方法。 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>Benjamin_Han</author>
      <pubDate>Mon, 26 Aug 2024 06:03:28 +0000</pubDate>
    </item>
    <item>
      <title>开关磁阻电机</title>
      <link>https://bbs.simol.cn/thread-208847-1-1.html</link>
      <description><![CDATA[如图输出转矩怎么是负的？]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>sirius2269</author>
      <pubDate>Tue, 11 Apr 2023 02:59:00 +0000</pubDate>
    </item>
    <item>
      <title>开关磁阻电机直接转矩控制simulink模型</title>
      <link>https://bbs.simol.cn/thread-208767-1-1.html</link>
      <description><![CDATA[相关模型有没有......]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>sirius2269</author>
      <pubDate>Thu, 30 Mar 2023 08:09:36 +0000</pubDate>
    </item>
    <item>
      <title>【求助贴】pid做永磁同步直线电机电流环q轴电流无法跟随</title>
      <link>https://bbs.simol.cn/thread-205750-1-1.html</link>
      <description><![CDATA[希望大牛们多指点指点小弟，小弟只接了电流环，之前不知道是不是由于SVPWM模块导致该问题所以下掉了，直接给电机输三相电流，但反馈的q轴电流还是只能跟随一会儿 不知道问题在哪]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>chenjiaminmin</author>
      <pubDate>Fri, 11 Mar 2022 10:06:07 +0000</pubDate>
    </item>
    <item>
      <title>电机效率map图边缘怎么变得顺滑？</title>
      <link>https://bbs.simol.cn/thread-205194-1-1.html</link>
      <description><![CDATA[请教用matlab做效率map的时候边缘怎么变得顺滑呢？脚本如下，数据如附件，还请不吝赐教，谢谢

A=xlsread(\'E:\\eff6.xls\');%读取文件数据，根据实际情况修改文件路径%
[m,n]=size(A);%计算数据行列数%
x=A(:,1);%转速存入x向量%
y=A(:,2);%扭矩存入y向量%
z=A(:,3);%效率 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>峰云</author>
      <pubDate>Mon, 27 Dec 2021 03:32:27 +0000</pubDate>
    </item>
    <item>
      <title>异步电机直接转矩仿真</title>
      <link>https://bbs.simol.cn/thread-201212-1-1.html</link>
      <description><![CDATA[各位大佬，小弟在做一个异步电机的Simulink仿真
电机135kW，6500r/min额定转速

但是在电机启动时，总是启动不起来，转矩一直在很小的值附近震荡，需要很久才会缓慢的提上去
这是转速和转矩的图



求解答，可以有偿，谢谢各位大佬
 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>哦o哦</author>
      <pubDate>Wed, 24 Feb 2021 13:25:12 +0000</pubDate>
    </item>
    <item>
      <title>交流电机的闭环控制中的电流采集滤波电路设计</title>
      <link>https://bbs.simol.cn/thread-199997-1-1.html</link>
      <description><![CDATA[本人目前在做伺服运动控制方向的课题，在交流电机的运行过程中，必然会涉及到电流的采集。  当电流通过HALL转换为单片机或者DSP能采集到的电压信号时，可能会受到一些外来和内在的影响，也会产生一些高次谐波。而这些杂波往往不能很好的被滤除掉 ，因此设计了一种 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>monster666</author>
      <pubDate>Tue, 24 Nov 2020 10:07:31 +0000</pubDate>
    </item>
    <item>
      <title>Dspace的串口通行教程 在电机编码器中的应用</title>
      <link>https://bbs.simol.cn/thread-199996-1-1.html</link>
      <description><![CDATA[永磁同步电机在闭环运行过程中，不免会涉及到速度的采集和反馈  ，分享一些关于增量式编码器和Dspace串口的资料  希望对大家有所帮助]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>monster666</author>
      <pubDate>Tue, 24 Nov 2020 09:58:24 +0000</pubDate>
    </item>
    <item>
      <title>基于simplorer永磁同步电机联合仿真</title>
      <link>https://bbs.simol.cn/thread-199833-1-1.html</link>
      <description><![CDATA[想请教一下simplorer simulink ansys 联合仿真的问题，根据在网上找的相关材料，自己搭建了一个联合仿真的模型，但是这个模型运行的时候会报错，是motionset in 与motionset out处的负载电路搭的不对吗？（T8就是motionsetup-out端口）。谢谢 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>宋泳达</author>
      <pubDate>Sat, 14 Nov 2020 08:18:21 +0000</pubDate>
    </item>
    <item>
      <title>基于dspace的永磁同步电机开环SPWM控制及电流位置速度的检测</title>
      <link>https://bbs.simol.cn/thread-199581-1-1.html</link>
      <description><![CDATA[可以开环使电机转动 通过调节频率和电压实现调速]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>monster666</author>
      <pubDate>Mon, 02 Nov 2020 02:54:10 +0000</pubDate>
    </item>
    <item>
      <title>有偿求助搭建无轴承开关磁阻电机simulink控制仿真，关于模型预测控制/滑膜控制/直接转矩和悬浮力控制等（选一即可）</title>
      <link>https://bbs.simol.cn/thread-199228-1-1.html</link>
      <description><![CDATA[如题，小弟想复现论文用来学习，无奈遇到了学习障碍，有偿寻simulink控制大佬]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>小明同学不吃鱼</author>
      <pubDate>Fri, 09 Oct 2020 07:37:54 +0000</pubDate>
    </item>
    <item>
      <title>有做电机控制的simulink大佬吗？小弟有偿求助复现期刊论文里的simulink仿真</title>
      <link>https://bbs.simol.cn/thread-199184-1-1.html</link>
      <description><![CDATA[如题：小弟做的是12/8无轴承单绕组开关磁阻电机，最近在看悬浮力控制方面的仿真。是关于直接转矩/悬浮力的控制。想请电机及simulink大佬有偿帮忙复现某期刊论文里的simulink仿真结果作为学习，但是看了数周依然没有做出来
 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>小明同学不吃鱼</author>
      <pubDate>Tue, 06 Oct 2020 09:07:43 +0000</pubDate>
    </item>
    <item>
      <title>PMSM的MTPA控制与传统弱磁控制</title>
      <link>https://bbs.simol.cn/thread-196859-1-1.html</link>
      <description><![CDATA[这是我最近研究永磁电机控制做的simulink模型，虽然比较简单，但是都是自己看文献一点一点搭出来并且调试好的，（调试的效果不是太好，转速上下波动5转左右）发出来是为了给像我这样刚刚接触的人做参考的。应该有一点实用价值吧，虽然非常简单，嘻嘻 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>DJN</author>
      <pubDate>Sat, 16 May 2020 01:46:57 +0000</pubDate>
    </item>
    <item>
      <title>电磁结构拓扑优化问题</title>
      <link>https://bbs.simol.cn/thread-196091-1-1.html</link>
      <description><![CDATA[最近做一个电磁学方面的的结构优化分析，突然在想，能不能用电磁学理论构造一个目标函数，如何利用拓扑优化技术进行结构寻优？查阅相关资料，现有的商用有限元分析软件（如ANSYS）一般只做结构拓扑优化，若将电磁学的物理量作为优化目标则无法进行拓扑优化，看一些文献 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>niubi</author>
      <pubDate>Sun, 29 Mar 2020 10:11:42 +0000</pubDate>
    </item>
    <item>
      <title>Maxwell导出三维数据，用MATLAB生成3D图形的方法</title>
      <link>https://bbs.simol.cn/thread-192361-1-1.html</link>
      <description><![CDATA[分享一个使用Maxwell得到的三维数据导入MATLAB中生成3D方法。（导出数据的格式为.txt或者.csv，并且删除数据中的变量名称，只保留数据就行）
感谢作者：心网千结
呃呃呃呃呃呃呃——加上自己的一些总结
——我只是大自然的搬运工
——如有错误，欢迎指正批评

 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>哥们干一杯、</author>
      <pubDate>Tue, 16 Jul 2019 01:30:54 +0000</pubDate>
    </item>
    <item>
      <title>电机直接转矩控制的一个小问题求解</title>
      <link>https://bbs.simol.cn/thread-192069-1-1.html</link>
      <description><![CDATA[如图片，从电机上一次引出来所有的量和分别引出来 两者有区别吗？ 我试了一下分别引出来的话可以得到很好的控制波形，而一次全部引出来 波形就不对了呢？]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>闭上眼的信任</author>
      <pubDate>Sun, 30 Jun 2019 11:03:12 +0000</pubDate>
    </item>
    <item>
      <title>5、7次谐波电流注入抑制转矩脉动</title>
      <link>https://bbs.simol.cn/thread-191836-1-1.html</link>
      <description><![CDATA[自己搭了一个谐波注入模型，原理如图所示，却始终无法抑制5、7次电流谐波，哪个大神可以提供建议，或者上传一下模型看看，真心求教]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>张超_LDZ7K</author>
      <pubDate>Sun, 16 Jun 2019 08:41:26 +0000</pubDate>
    </item>
    <item>
      <title>Matlab 和Maxwell 仿真出的电磁转矩波形</title>
      <link>https://bbs.simol.cn/thread-191766-1-1.html</link>
      <description><![CDATA[为什么Matlab仿真的电磁转矩和Maxwell的转矩波形不是一个东西的感觉，Maxwell的转矩波形是一个值，matlab是 0]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>zzyy</author>
      <pubDate>Sun, 09 Jun 2019 07:54:01 +0000</pubDate>
    </item>
    <item>
      <title>永磁同步电机无速度传感器控制仿真波形不对，望相助</title>
      <link>https://bbs.simol.cn/thread-188814-1-1.html</link>
      <description><![CDATA[研究生一枚，一直在调pmsm无速度的仿真，但是波形总是不对，转速甚至是负的。。。用的反电势积分法]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>周世炯_JG33I</author>
      <pubDate>Thu, 28 Feb 2019 09:00:57 +0000</pubDate>
    </item>
    <item>
      <title>maxwell和simulink联合仿真时报错</title>
      <link>https://bbs.simol.cn/thread-188358-1-1.html</link>
      <description><![CDATA[按照论坛里的教程尝试maxwell和simulink的联合仿真，在maxwell里电机激励中设置选择“Setup Co-Simulation with Simulink”，随后点击“Edit Circuit”时出现这种情况。maxwell和matlab的版本分别是17.1和2015a，应该是兼容的。有没有大神知道原因，希望指教。 ...]]></description>
      <category>〖MATLAB/Simulink资源中心〗</category>
      <author>txjdly123</author>
      <pubDate>Wed, 16 Jan 2019 07:17:46 +0000</pubDate>
    </item>
  </channel>
</rss>