<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>西莫电机圈 - 『JMAG』</title>
    <link>https://bbs.simol.cn/forum-114-1.html</link>
    <description>Latest 20 threads of 『JMAG』</description>
    <copyright>Copyright(C) 西莫电机圈</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 07 May 2026 01:05:32 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://bbs.simol.cn/static/image/common/logo_88_31.gif</url>
      <title>西莫电机圈</title>
      <link>https://bbs.simol.cn/</link>
    </image>
    <item>
      <title>Jmag 3D建模空载磁链没问题，空载反电势只有一半，是什么原因，各位路过大神我真心求助！！！！</title>
      <link>https://bbs.simol.cn/thread-219965-1-1.html</link>
      <description><![CDATA[jmag 3D建模时空载磁链可以对得上Maxwell，但空载反电势对不上，是Maxwell的一半，这是什么原因？小弟万思不得其解，请路过的大神们指点指点
（小弟刚入坑jmag，操作上可能不太熟悉，空载磁链和反电势都是边跑边看的，空载磁链看的是flux in coil，反电势是电压表，请大 ...]]></description>
      <category>『JMAG』</category>
      <author>Adam_X</author>
      <pubDate>Wed, 06 May 2026 08:42:35 +0000</pubDate>
    </item>
    <item>
      <title>双三相电机如何求电感</title>
      <link>https://bbs.simol.cn/thread-219937-1-1.html</link>
      <description><![CDATA[用tool里的电感工具和condition里的电感都不能用，说只能有一个电流源。
如果只用其中一套绕组加一个电流源算出来的电感，和双三相的电感是什么数值关系？看是否可以转化。]]></description>
      <category>『JMAG』</category>
      <author>gugufei</author>
      <pubDate>Wed, 29 Apr 2026 08:46:44 +0000</pubDate>
    </item>
    <item>
      <title>JMAG中电磁功率计算方法问题</title>
      <link>https://bbs.simol.cn/thread-219854-1-1.html</link>
      <description><![CDATA[用JMAG计算SVPWM驱动的300kw永磁电机，机械功率直接用P=omega*T得到。电磁功率用graph中的total平均得到的数值显然不对，


用电压电流的瞬时值相乘再三相求和得到的功率数值大小还可以。不知后者计算方法对么？


第二个问题是：SVPWM设置电流相位角在0和180应该一个是 ...]]></description>
      <category>『JMAG』</category>
      <author>gugufei</author>
      <pubDate>Thu, 16 Apr 2026 05:37:10 +0000</pubDate>
    </item>
    <item>
      <title>电机解析建模</title>
      <link>https://bbs.simol.cn/thread-219766-1-1.html</link>
      <description><![CDATA[求个电机解析建模的大佬]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Sat, 28 Mar 2026 12:48:19 +0000</pubDate>
    </item>
    <item>
      <title>把负载电流分解成d轴和q轴，单独加d或者q轴电流如何实现</title>
      <link>https://bbs.simol.cn/thread-219752-1-1.html</link>
      <description><![CDATA[把负载电流分解成d轴和q轴，单独加d或者q轴电流如何实现]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Wed, 25 Mar 2026 08:45:17 +0000</pubDate>
    </item>
    <item>
      <title>jMAG/UNITS/PREFERENCES</title>
      <link>https://bbs.simol.cn/thread-219744-1-1.html</link>
      <description><![CDATA[JMAG UNITS PREFERENCES对话框太大,最下边确定看不到，如何调整]]></description>
      <category>『JMAG』</category>
      <author>zzhylmzry</author>
      <pubDate>Tue, 24 Mar 2026 14:29:01 +0000</pubDate>
    </item>
    <item>
      <title>jmag designer 3d 电路报错</title>
      <link>https://bbs.simol.cn/thread-219527-1-1.html</link>
      <description><![CDATA[如题：
 有没有大佬解答下，感谢！！！]]></description>
      <category>『JMAG』</category>
      <author>arangxxx</author>
      <pubDate>Tue, 10 Feb 2026 00:56:27 +0000</pubDate>
    </item>
    <item>
      <title>jmag轴向磁通电机3d仿真</title>
      <link>https://bbs.simol.cn/thread-219512-1-1.html</link>
      <description><![CDATA[新手初学jmag。了解绕组设定通常是添加winding或者添加FEM coil。刚开始使用winding设置网格划分正常，仿真求解时候显示找不到电流路径。换成FEM coil仿真能正常进行。请问是哪里设置错误吗？]]></description>
      <category>『JMAG』</category>
      <author>zxxzxx</author>
      <pubDate>Thu, 05 Feb 2026 13:46:21 +0000</pubDate>
    </item>
    <item>
      <title>三维全模型仿真</title>
      <link>https://bbs.simol.cn/thread-219431-1-1.html</link>
      <description><![CDATA[三维全模型出现这种情况是什么原因，他是由二维模型扩展过来的，二维模型仿真正常]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Fri, 16 Jan 2026 12:35:43 +0000</pubDate>
    </item>
    <item>
      <title>JMAG求解时CPU、内存跑不满</title>
      <link>https://bbs.simol.cn/thread-219411-1-1.html</link>
      <description><![CDATA[用JMAG做的静磁学仿真，三维的大概几百万个网格，得跑两个多小时吧，中途打开任务管理器看了下，CPU利用率30%左右，内存利用率50%左右（32g/64g），用工作站也跑了一下，256g的内存，只用了10%左右（25g/256g）。想问一下，JMAG有没有手动分配资源利用率的功能，只找到 ...]]></description>
      <category>『JMAG』</category>
      <author>莫嘻嘻丶</author>
      <pubDate>Wed, 14 Jan 2026 00:56:36 +0000</pubDate>
    </item>
    <item>
      <title>如何计算电机效率和永磁损耗</title>
      <link>https://bbs.simol.cn/thread-219370-1-1.html</link>
      <description><![CDATA[如何计算电机效率和永磁损耗]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Mon, 05 Jan 2026 02:09:06 +0000</pubDate>
    </item>
    <item>
      <title>铜损，永磁损耗计算</title>
      <link>https://bbs.simol.cn/thread-219296-1-1.html</link>
      <description><![CDATA[如何计算电机铜损，永磁损耗计算]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Tue, 23 Dec 2025 13:15:31 +0000</pubDate>
    </item>
    <item>
      <title>求用JMAG计算线圈交流电阻和电感的方法</title>
      <link>https://bbs.simol.cn/thread-218605-1-1.html</link>
      <description><![CDATA[rt，需要分析线圈的交流电阻和电感，按理说应该是有 V = Vreal + j Vimag， I = Ireal + j Iimag 的复数形式，然后可以算交流电阻。但是jmag里没有找到能输出这个的地方。
或者其他能计算Rac的方法也可以 ...]]></description>
      <category>『JMAG』</category>
      <author>Paradox</author>
      <pubDate>Tue, 02 Dec 2025 02:58:07 +0000</pubDate>
    </item>
    <item>
      <title>JMAG混合励磁电机仿真正向励磁电流 也掉磁、负向励磁电流 也掉磁，即 E₀ 在</title>
      <link>https://bbs.simol.cn/thread-218477-1-1.html</link>
      <description><![CDATA[JMAG混合励磁电机仿真正向励磁电流 也掉磁、负向励磁电流 也掉磁，即 E₀ 在 If = 0 附近出现“山峰”，两边同时下跌，出现这种 钟形曲线 的原因是什么]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Fri, 14 Nov 2025 07:26:24 +0000</pubDate>
    </item>
    <item>
      <title>Jmag绕组自动连接方式怎么选</title>
      <link>https://bbs.simol.cn/thread-218325-1-1.html</link>
      <description><![CDATA[Jmag绕组自动连接方式怎么选 auto(type1)和auto(type2)，双层圆线绕组改选哪种？这两种有什么区别]]></description>
      <category>『JMAG』</category>
      <author>13222716879</author>
      <pubDate>Tue, 28 Oct 2025 15:26:11 +0000</pubDate>
    </item>
    <item>
      <title>利用气隙磁密FFT分解判断绕组极对数</title>
      <link>https://bbs.simol.cn/thread-218272-1-1.html</link>
      <description><![CDATA[利用气隙磁密FFT分解判断绕组极对数]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Sun, 19 Oct 2025 05:41:20 +0000</pubDate>
    </item>
    <item>
      <title>JMAG 仿真空载转速和电流</title>
      <link>https://bbs.simol.cn/thread-218248-1-1.html</link>
      <description><![CDATA[有没有大佬知道怎么用JMAG 仿永磁同步电机的空载转速和空载电流哇？]]></description>
      <category>『JMAG』</category>
      <author>lh_yin</author>
      <pubDate>Thu, 16 Oct 2025 12:17:47 +0000</pubDate>
    </item>
    <item>
      <title>JMAG和modeFRONTIER联合仿真问题</title>
      <link>https://bbs.simol.cn/thread-218221-1-1.html</link>
      <description><![CDATA[现象：JMAG和modeFRONTIER联合仿真优化效率时，出现计算中断问题，发现Scheduler自动退出，再打开只能把已经提交的部分算完，但modeFRONTIER不再继续往下计算

求助怎么处理？

另外modeFRONTIER点击stop后，再点击run，就从第一个case重新开始计算，有什么方法从中断部 ...]]></description>
      <category>『JMAG』</category>
      <author>buzhidaoCZ</author>
      <pubDate>Sun, 12 Oct 2025 00:58:30 +0000</pubDate>
    </item>
    <item>
      <title>反电动势异常</title>
      <link>https://bbs.simol.cn/thread-218175-1-1.html</link>
      <description><![CDATA[数值偏小，波形也不平滑，三相也不对称]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Mon, 29 Sep 2025 01:55:19 +0000</pubDate>
    </item>
    <item>
      <title>反电动势</title>
      <link>https://bbs.simol.cn/thread-218166-1-1.html</link>
      <description><![CDATA[反电动势太小，且不对称]]></description>
      <category>『JMAG』</category>
      <author>OK仔</author>
      <pubDate>Sat, 27 Sep 2025 02:18:16 +0000</pubDate>
    </item>
  </channel>
</rss>