jitongw 发表于 2012-2-21 16:49

maxwell 15 and JMAG 10.5 use SW2012 model

本帖最后由 jitongw 于 2012-2-21 17:02 编辑


Assemble view and Section view in sw2012

jitongw 发表于 2012-2-21 16:50

jitongw 发表于 2012-2-21 16:51

jitongw 发表于 2012-2-21 16:57

本帖最后由 jitongw 于 2012-2-21 17:00 编辑

How to use sw2012 model:
1. Make all parts in sw2012
2. Assemble these parts and save it as assemble file in sw2012
3. Save as ProE assemble format file
4. Import in maxwell v15 or JMAG 10.5
5. The final results are as the pictures above

杨杨 发表于 2012-2-21 19:10

牛啊 楼上的！正在学习中。。。

Actuator77 发表于 2012-2-21 20:40

请问楼主的Maxwell是64bit么？

hxmotor 发表于 2012-2-21 20:54

导入虽然能导入了，是否可以正常的划分网格和分析？

hung07227 发表于 2012-2-21 21:04

可以請問一下嗎?
64bit與32bit的檔案能共用嗎??

jitongw 发表于 2012-2-22 00:42

Yes !!!

回复 6# Actuator77

jitongw 发表于 2012-2-22 00:43

I think so, but I did not tested!!!!

回复 8# hung07227

kingsea.jimmy 发表于 2012-2-22 19:27

64bit與32bit的檔案能共用嗎

jitongw 发表于 2012-3-5 07:57

本帖最后由 jitongw 于 2012-3-5 07:58 编辑

Maxwell Model vs SW 2012 model( output format is SAT )For SW model:1. cylinder surfaces separate to two half ( Maxwell is whole )2. mesh operation time is double of Maxwell model 3. analyse time is double of Maxwell model
Conclution: SW2012 is more flexible but will cause more resource in maxwell application

jitongw 发表于 2012-3-5 07:59

I think so !

回复 11# kingsea.jimmy

FY_1996 发表于 2012-6-6 10:13

I think so !

回复kingsea.jimmy
jitongw 发表于 2012-3-5 07:59 http://bbs.simol.cn/images/common/back.gif


    你好，能给一个下载jmag10.5下载的连接吗？

jitongw 发表于 2012-6-6 13:54

回复 14# FY_1996

Got bellow sub web
___h_ttp://bbs.simol.cn/forum-186-1.html

Look for it, but I do not know if it still active for download ?
页: [1]
查看完整版本: maxwell 15 and JMAG 10.5 use SW2012 model