jitongw 发表于 2012-2-9 01:17

Simplorer_9 Maxwell_15 Cosimulate

jitongw 发表于 2012-2-9 01:19

本帖最后由 jitongw 于 2012-2-9 01:30 编辑

1. Run maxwell 15, do not need to open project, just wait there !
2. Run simplorer 9, open project. Double click Simplorer1, fix to whole screen, then you should see

This example demonstrates the dynamic inductance (LMatrix1)
and dynamic capacitance (CMatrix1) coupling between Simplorer and Maxwell


3. Simplore Circuit -> Analyze
4. You should see both Simplore and maxwell run ( On status windows )
5. After a few minutes, done. You can check results on both software.

You do not need to download the bellow attach files, it just come from simplorer samples.



jitongw 发表于 2012-2-9 01:35

The purpose of this post:
1. Check the install of both your simplorer 9.0 and maxwell 15.0.
2. Check both are correctly PJ.
3. From this demo, learn how to do the cosimulation !!!!

hxmotor 发表于 2012-2-9 08:53

多谢楼主分享！
页: [1]
查看完整版本: Simplorer_9 Maxwell_15 Cosimulate