jitongw 发表于 2012-2-9 00:04

Simulink_Simplorer9_Cosimulate

jitongw 发表于 2012-2-9 00:06

本帖最后由 jitongw 于 2012-2-9 00:24 编辑

Matlab 64-bit does not work, must use 32-bit version !

Matlab 2009b and 2010an 32-bit should work
In matlab, you need setup as:
    Set path..      let it point to    C:\Program Files (x86)\Ansoft\Simplorer9.0\cpl\matlab\r2009b
                            or                C:\Program Files (x86)\Ansoft\Simplorer9.0\cpl\matlab\r2010a

Then you can do cosim now.

jitongw 发表于 2012-2-9 00:30

Bellow is an sample which is working.
You do not need to download because it just from samples of Simplorer 9.0 !



jitongw 发表于 2012-2-9 00:34

You do not need to run simplorer during cosim.
You only need to run   *.mdl in simulink program.
It will automatic invokes simplorer .

playingwolf 发表于 2013-3-7 19:22

2楼高见，把matlab2010b从64位改到32位就能和simplorer v10联了

tingmeeting65 发表于 2013-3-10 19:14

{:soso_e179:}

tingmeeting65 发表于 2013-3-10 19:46

谢谢楼主分享

飘零zero 发表于 2013-3-21 09:29

Thank you very much !

focus2009 发表于 2013-3-21 10:43

牛人啊！！！！！
页: [1]
查看完整版本: Simulink_Simplorer9_Cosimulate