zjuzgz 发表于 2011-4-1 16:49

FEM Conductors怎么赋电流？

是一个对称模型，电流流入/流出平面与对称边界(Symmetry Boundary)重合了,仿真时总是出现下面这个错误：

If a conductor is set outside the inflow/outflow planes of the FEM conductor, the calculation cannot be performed.
Check the material properties of the element ID 43512.
Also, check the settings around the FEM conductor where the FEM conductor condition 1 is set.

请高手指点，谢谢！

kkguo 发表于 2015-2-12 19:41

谢谢楼主，受教了。
页: [1]
查看完整版本: FEM Conductors怎么赋电流？