a9473806 发表于 2011-3-31 16:20

CAPRI 3.12b

This installer is required to link to CATIA V5, Pro/Engineer, and NX.
For information about the installation, see "JMAG Installation Manual."

CAPRI Version 3.12b is supported by JMAG-Designer 5.0.20 or later and JMAG-Designer 10.3.02 or later.
The license type of CAPRI3.12b is different from CAPRI3.12. A new license is required to use CAPRI3.12b.
Please contact your distributor to request a license.

不知道這大家有沒有需要{:1_432:}



hscqu 发表于 2011-4-12 08:39

已下载，谢谢分享

flyingmind 发表于 2011-4-12 09:36

回复 1# a9473806

应该需要lic才能用？

dnawujun 发表于 2011-4-12 23:09

回复 1# a9473806
介绍下这玩意是干啥的？

a9473806 发表于 2011-4-12 23:27

本帖最后由 a9473806 于 2011-4-12 23:30 编辑

回复a9473806
介绍下这玩意是干啥的？
dnawujun 发表于 2011-4-12 23:09 http://bbs.simol.cn/images/common/back.gif
CAD Link
CAPRI (for JMAG-Designer)
Links JMAG-Designer to commercial CAD software. The following programs are supported.
CATIA V5
Pro/ENGINEER V5
NX

JMAG-Communicator (for JMAG-Studio/JMAG-Designer)
Links JMAG to SolidWorks.
This option is included in the JMAG standard features.



laplace 发表于 2011-5-10 11:03

很有用的东西，这样建模就方便多了！（虽然现在还没有破解我的10.4，下来留着以后用）

a9473806 发表于 2011-5-12 11:55

連結失效煩請刪除{:1_432:}

wtliu 发表于 2011-5-18 10:32

真的不好用了吗？还有新链接吗？

我饿高清网络高 发表于 2012-3-5 15:04

强悍啊！！！

我饿高清网络高 发表于 2012-3-5 15:04

要了！！！

tw211 发表于 2012-10-12 10:24

好资料，谢谢大家分享
页: [1]
查看完整版本: CAPRI 3.12b