线圈参数优化的问题
本帖最后由 tang76 于 2011-1-9 12:54 编辑附件所示的模型,单击运行,能跑完第一个扫描点,但在后面的运行中会提示:
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup
请问我的模型哪里建立或设置得有问题?
谢谢!
这是整个运行过程的输出信息,烦请大侠帮我分析一下模型哪里出问题了。
谢谢
coil_test (E:/ansoft/temp/Ansoft/)
Maxwell3DDesign1 (EddyCurrent)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:34:06 上午一月 10, 2011)
Normal completion of simulation on server: Local Machine. (7:35:45 上午一月 10, 2011)
Parametric Analysis on ParametricSetup1 has been started. (7:35:45 上午一月 10, 2011)
A variation ($xigma='0.005S_per_m') has been requested on machine Local Machine (7:35:48 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:35:48 上午一月 10, 2011)
A variation ($xigma='1.11555555555556S_per_m') has been requested on machine Local Machine (7:37:24 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:24 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:24 上午一月 10, 2011)
A variation ($xigma='2.22611111111111S_per_m') has been requested on machine Local Machine (7:37:24 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:24 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:24 上午一月 10, 2011)
A variation ($xigma='3.33666666666667S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='4.44722222222222S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='5.55777777777778S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='6.66833333333333S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='7.77888888888889S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='8.88944444444444S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:25 上午一月 10, 2011)
A variation ($xigma='10S_per_m') has been requested on machine Local Machine (7:37:25 上午一月 10, 2011)
Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(7:37:25 上午一月 10, 2011)
Matrix 'Matrix1': 'Current1' is an invalid source for matrix setup (7:37:26 上午一月 10, 2011)
Parametric Analysis is done. (7:37:26 上午一月 10, 2011) 烦请高手帮我看一下,对高手来说设置参数扫描应该是很简单的事情,可我这个新手就是怎么也搞不定
多谢了 虽然线圈的感抗等参数,与其上所加源没有什么关系,但是软件中计算感抗矩阵,是通过能量法,也就是说你所求线圈上必须要有电流流通,个人感觉你模型中current1强制为零是不对的,应该给一个电流值。 非常感谢版主的回复,这个强制加0电流是为了模拟断路,参考:
Maxwell 2D Application Note A 2D Eddy Current Problem
多谢 刚才试了把另一个线圈的电流也改成1 A,还是同样的错误。
谢谢 本帖最后由 tang76 于 2011-1-10 22:05 编辑
进一步试验发现,如果删除那个Matrix1,参数扫描能进行下去,可这个Matrix1是怎么设置错了呢?望高手再帮我看看是什么问题。
谢谢 看不明白,继续学习
页:
[1]