zzxin456 发表于 2010-12-27 15:52

大家Ansoft 13 用得感觉如何?

用过ANSOFT13 的觉得13如何?稳定吗?有出现过什么问题没?

gurilla 发表于 2010-12-27 23:07

软件内部错误1026是什么意思?

*Global - Messages
Left-alt + shift is currently used by the system to toggle the input language. It is also used in some portions of this application, which may cause the input language to change unexpectedly.
500kV_22 (E:/TDDOWNLOAD/Users/768576028/FileRecv/)
Maxwell3DDesign1 (Electrostatic)
    Adaptive passp, process efs3d : Unexpected internal software error code 1026 with module id 14. (9:20:31 下午十二月 27, 2010)
    Simulation completed with execution error on server: Local Machine. (9:20:31 下午十二月 27, 2010)

难道是破解不完全,或者节点数限制?但是节点数也不多啊!

kld 发表于 2011-1-2 09:09

我用他做了一个YX3-355L-2 380V 50Hz 315kW 的三相异步电动机的电磁计算,转子槽采用凸型槽,冲片图显示正确,但是在计算单中:type of rotor bottom slot :dimenion ofrotor bottom slot 项显示的全是定子的槽型尺寸,堵转转矩倍数:locked rotor torque ratio项只有1.09597 ,堵转电流倍数locked rotor current ratio:8.9,在转子上加上通风孔后 ,额定时的功率因数仅有0.219. no load stator phase current :1369.1 很异常,谢啦!(说明:参数输入后右上面显示的定转子槽型均正常) ,另外,在转子上加上通风孔后,生成2D后的模型无通风孔。不知如何是好,请高手指点.
页: [1]
查看完整版本: 大家Ansoft 13 用得感觉如何?