dxxd 发表于 2008-7-24 22:47

rmxprtv5如何导入maxwell2d.3d

本帖最后由 forlink 于 2008-12-23 22:11 编辑

请问大侠rmxprtv5如何导入maxwell2d.3d谢谢！

edward166 发表于 2008-8-2 12:39

可參考ansoft手冊中下列說明試看看~
Create the Maxwell 2D Project
1.        Choose Tools/Options, and make certain that the Periodic and Teeth-Teeth options are selected, and then choose OK to close the window. These options allow you to take advantage of the motor symmetry.
2.        Choose Analysis/View Geometry. The Maxwell 2D Modeler appears, displaying the geometry.
3.        Choose File/Exit to exit the Maxwell 2D Modeler.
4.        Choose Analysis/Create Maxwell 2D Project. A message window appears, informing you that the Maxwell 2D project has been created.
5.        Choose OK to close the message window.
6.        Return to the Project Manager to continue with the rest of this example. Leave RMxprt open to refer to later in the example.

huangbing9826 发表于 2008-8-17 14:05

能不能用中文解释一下呀,不太明白

hahaqiang 发表于 2008-12-17 11:48

看样子要手把手教啦，呵呵

williamyuanyuan 发表于 2008-12-23 13:52

看帮助文件啊

forlink 发表于 2008-12-23 22:10

对于破解版的rmxprt5.0无法导入maxwell 2d和3d，但是可以到论坛ftp区下载ansoft maxwell 11.1，里面集成了rm，2d和3d，可以实现导入。

flfbb 发表于 2009-10-7 10:44

我不论是V10还是V11.1都导入不了啊，怎么办啊
页: [1]
查看完整版本: rmxprtv5如何导入maxwell2d.3d