hustxiaobai 发表于 2010-5-12 14:01

急啊，哪位好心人帮我看看出了啥问题，谢谢啦

求解器是3D瞬态场，模型检查都过关了，但是运行后就出现了这样的错误bishe (C:/Users/jiangnan/Documents/Ansoft/)
Maxwell3DDesign1 (Transient)
    Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(1:53 下午五月 12, 2010)
    Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(1:53 下午五月 12, 2010)
    Could not map vertices on the moving mesh band.Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged. (1:55 下午五月 12, 2010)
    Simulation completed with execution error on server: Local Machine. (1:55 下午五月 12, 2010)
请问这是哪出毛病了

hustxiaobai 发表于 2010-5-12 21:19

谁帮忙看看啊，小弟不胜感激啊

cixiaodao 发表于 2010-5-13 12:03

很想帮你，我也不懂。

cixiaodao 发表于 2010-5-13 12:06

Motion setup是相位检测的意思吧？
页: [1]
查看完整版本: 急啊，哪位好心人帮我看看出了啥问题，谢谢啦