yatou0806 发表于 2010-2-6 14:00

Maxwell 12 3D对BLDC瞬态磁场求解问题

在Maxwell 12 3D中对BLDC进行瞬态磁场求解分析,Band应该如何设置?是否是将所有运动部件都包含在Band里,还是Band仅仅是在气隙中。以及在求解过程中,出现如下问题:
6 (E:/maxwell 12.0/)
Maxwell3DDesign1 (Transient)
    Eddy effect settings may need revisiting due to the recent changes in the design.The default value will be used for the object if the value is not specified.(1:50 下午二月 06, 2010)
    Wrong band mesh.Suggested solutions: (1). Add the InnerRegion to wrap all moving objects. (2). Specify smaller normal deviation angle to InnerRegion (suggested angle is twice as much as band object surface). (3). If the band gap very is small, a small segment is needed for band object so that the smooth curvature can be built on band surface. (4). Band object has true surfaces, but no mesh operation or operation is too large. (1:57 下午二月 06, 2010)
    Simulation completed with execution error on server: Local Machine. (1:57 下午二月 06, 2010)
请各位高手指点,问题出在哪里?该如何解决?不胜感激!!

ENZO 发表于 2010-2-6 14:08

BAND是包含所有运动物体的, 你这个错误是说:1. 增加一个物体包含所有运动物体, 和BAND类似2. 在这个物体上设置比较小的法向偏差, 建议角度是BAND法向偏差的两倍 3. 如果气隙很窄, BAND物体应该具有很小的多边形的边长, 这样可以形成一个平滑的物体4. 如果BAND设置成真圆, 要增加MESH OPERATION 来设置它的边界。

建议按照上面说的来设置, 应该能解决问题。

maxthonzwq 发表于 2010-2-6 22:13

顶楼主了,谢谢楼主

SW801_005C 发表于 2011-9-15 08:51

我也出现这个问题了,后来把band改成段数较多的多边形就好了。
页: [1]
查看完整版本: Maxwell 12 3D对BLDC瞬态磁场求解问题