请问ansoft12.1是不是对电脑的性能要求很高?
发现有的例子在自己的电脑上不能算,网格剖分那一块进行不了但是拿到工作站电脑上就可以了,但如果模型继续复杂的话,工作站的电脑也算不了了。
请问大家对这个有没有研究?
到底需要性能多高的电脑? 主要是你用哪个模块,如果用3D那是肯定要配置好的了。 我用的是2D模块,呵呵
那需要多高的配置呢? 我觉得2d模块 07年以后配的电脑都行{:1_452:} Supported Operating Systems (Windows version):
Windows XP Professional
Windows XP Professional x64 Edition
Windows Server 2003
Windows Server 2003 x64 Edition
Windows Vista is supported in limited capacity for this release.Ansoft will attempt
to assist with any problems or questions you may have but cannot guarantee full
compatibility with Windows Vista.
Known Issues with Vista
1) You cannot check out a license that is locked to a USB dongle on Windows
Vista x64 when connecting to the Vista machine through Remote Desktop.
This is a known issue in FLEXlm.
Requirements
============
32-Bit System Requirements
Minimum System Requirements:
Processor: All fully compatible 686 (or later) instruction set processors, 500 MHz
Hard Drive Space (for Maxwell software): 200 MB
RAM: 512 MB
Recommended Minimum Configuration (for Optimal Performance):
Processor: All fully compatible 786 (or later) instruction set processors, 1 GHz
Hard Drive Space (for Maxwell software and temporary files): 500 MB
RAM: 2 GB
If necessary, you can increase the RAM on a 32-Bit PC.
64-bit System Requirements
Minimum System Requirements:
Supported processors: AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support,
Intel Pentium 4 with Intel EM64T support
Hard Drive Space (for Maxwell software): 200 MB
RAM: 2 GB
Recommended Minimum Configuration (for Optimal Performance):
Supported processors: AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support,
Intel Pentium 4 with Intel EM64T support
Video card: 128-bit SVGA or PCI Express video card
Hard Drive Space (for Maxwell software and temporary files): 700 MB
RAM: 8 GB 对计算机要求主要是前处理器和后处理部分对计算机的要求,
Mawell不算高了,比09年最新版本的Ansys 12.1或者MSCPatran/Nastran 2009 都低 谢谢,配台好电脑也很关键。 正在想学,请大家多指点 .
页:
[1]