hq1234 发表于 2009-11-9 11:05

ansoft v_12 3D band 问题

请问高位高手见过这样的错误提示吗，怎么解决？
file:///D:/Program%20Files/Tencent/QQ/Users/396802876/Image/7XRTO}(YZLKF_)V[$2UP

hq1234 发表于 2009-11-9 11:16

不好意思，刚才没弄明白
提示错误是这样的：
Maxwell3DDesign1 (Transient)
    Could not map vertices on the moving mesh band.Possible causes are: 1) Motion setup is not correct. 2) The model uses rotational motion, the geometry is less than a full circle, and master-slave boundaries were not defined on the surfaces of the wedge. 3) The model uses translational motion, and true surface curves were used on the band object or on the outermost faces of moving objects. 4) Extremely small gaps or faces exist in the geometry. These may need to be removed or enlarged. (11:13 AM十一月 09, 2009)

isaac_fox 发表于 2009-11-10 13:47

我也见过这个错误，也不知道什么原因，同问
感觉有时候重新画一次又好了，不知为什么

lieridongqing 发表于 2010-8-22 18:57

把band重新设定一下，可能会有帮助，我就是这么弄好的

haifeifei 发表于 2012-12-16 17:20

怎么设定哟？

电机BOY 发表于 2012-12-16 23:18

重新做一下试试！！
页: [1]
查看完整版本: ansoft v_12 3D band 问题