FLUX MOROT建立模型导入3D界面出错，求助！！！
请问下各位FLUX大佬，我用MOTOR建立的模型，导出到2D没问题，但是我想把2D模型导入到3D界面，出现如下错误是怎么回事啊。stdcom.error.WarningFortranException: An infinite box has been imported : in the case of periodicities, the geometry must be completed and in all cases, faces must be built.
Command :
DISK type infinite box : the domain is not 2D or AXI.
OCEI04 => Attribute recording aborted
SKRMAC => Unable to treat the active mode Sketch
UndoRestore =>failed
模型如图所示，应该是没有什么问题，但是导入就是会出现这样错误
页:
[1]