zyp123 发表于 2024-3-19 13:48

新手，求助各位大佬

我是自己绘制的线圈将激励什么都设置好了后，mesh设置surfapprox,对其进行仿真出现了Error in calculating the conduction paths. The most likely reason is that the mesh of the source conductor is wrong.与Simulation completed with execution error on server: Local Machine. 这两个报错，请问如何解决，谢谢。

maxpower 发表于 2024-3-19 14:28

我也想知道，坐等高手来解答

lijo 发表于 2024-3-21 04:03

checks the excitations in the conductions paths, the cross sections must be strictly perpendicular to the conduction path

xiaohai123 发表于 2024-7-8 00:53

可能是网格的问题，换成内部剖分试试
页: [1]
查看完整版本: 新手，求助各位大佬