求！tesla model3电机仿真参数
需要做一个model3永磁同步电机的仿真，求电机的具体参数！！ IPM ADJUSTABLE-SPEED SYNCHRONOUS MOTOR DESIGNFile: Setup1.res
GENERAL DATA
Operation Type: Motor
Source Type: AC
Rated Output Power (kW): 200
Rated Power Factor: 0.97
Capacitive Power Factor: Yes
Frequency (Hz): 250
Rated Voltage (V): 245
Load Type: Const Power
Rated Speed (rpm): 5000
Operating Temperature (C): 75
STATOR DATA
Stator Core Type: SLOT_AC
Stator Position: Outer
Number of Poles: 6
Outer Diameter of Stator (mm): 232
Inner Diameter of Stator (mm): 151.4
Length of Stator Core (mm): 120
Stacking Factor of Stator Core: 0.95
Steel Type of Stator: M330-35A
Number of Stator Slots: 54
Type of Stator Slot: 3
Stator Slot
hs0 (mm): 0.7
hs1 (mm): 0.1
hs2 (mm): 16.13
bs0 (mm): 0.6
bs1 (mm): 4.4
bs2 (mm): 4.4
rs (mm): 0
Top Tooth Width (mm): 4.50353
Bottom Tooth Width (mm): 6.37929
STATOR WINDING DATA
Number of Phases: 3
Winding Connection: Y3
Number of Parallel Branches: 6
Number of Layers: 1
Winding Type: Whole Coiled
Winding Factor: 0.959795
Number of Conductors per Slot: 10
Number of Wires per Conductor: 1
Wire Diameter (mm): 2.443
Wire Wrap Thickness (mm): 0.12
Wedge Thickness (mm): 0.3
Slot Liner Thickness (mm): 0.3
Layer Insulation (mm): 0
Slot Area (mm^2): 71.642
Net Slot Area (mm^2): 56.574
Slot Fill Factor (%): 116.113
Limited Slot Fill Factor (%): 90
**** Warning - Result is Unfeasable ****
Slot Fill Factor is beyond its limited value.
Coil Half-Turn Length (mm): 223.287
End Length Adjustment (mm): 5
End-Coil Clearance (mm): 0
Conductor Type of Stator: copper_90C
Conductor Resistivity at 75C (ohm.mm^2/m): 0.0216783
ROTOR DATA
Rotor Core Type: PM_INTERIOR
Rotor Position: Inner
Number of Poles: 6
Outer Diameter of Rotor (mm): 149
Inner Diameter of Rotor (mm): 45
Length of Rotor Core (mm): 120
Stacking Factor of Rotor Core: 0.95
Steel Type of Rotor: M330-35A
Rotor Pole Type: 3
Rotor Pole Dimensions:
D1 (mm): 146.3
O1 (mm): 2.8
O2 (mm): 30.1
B1 (mm): 8
Rib (mm): 6.35
HRib (mm): 3
Magnet Thickness (mm): 7.8
Magnet Width per Pole (mm): 40.6
Magnet Type: N48UH_80C
Maximum Magnet Width per Pole (mm): 50.608
SHAFT DATA
Magnetic Shaft: No
Friction Loss (W): 0
Windage Loss/Power (W): 0
Reference Speed (rpm): 9000
PERMANENT MAGNET DATA
Residual Flux Density (Tesla): 1.20072
Coercive Force (kA/m): 910
Maximum Energy Density (kJ/m^3): 273.163
Relative Recoil Permeability: 1.05003
Demagnetized Flux Density (Tesla): 0
Recoil Residual Flux Density (Tesla): 1.20072
Recoil Coercive Force (kA/m): 910
MATERIAL CONSUMPTION
Stator Wire Density (kg/m^3): 8933
Stator Core Steel Density (kg/m^3): 7650
Rotor Magnet Density (kg/m^3): 7650
Rotor Core Steel Density (kg/m^3): 7650
Stator Copper Weight (kg): 5.04884
Stator Core Steel Weight (kg): 17.7924
Rotor Core Steel Weight (kg): 11.6558
Rotor Magnet Weight (kg): 1.74427
Stator Net Weight (kg): 22.8412
Rotor Net Weight (kg): 13.4001
Stator Core Steel Consumption (kg): 32.9552
Rotor Core Steel Consumption (kg): 15.2065
UNSATURATED PARAMETERS
Stator Resistance R1 (ohm): 0.00516324
Stator Resistance at 20C (ohm): 0.00424718
Stator Leakage Inductance L1 (H): 2.84962e-05
Slot Leakage Inductance Ls1 (H): 1.96703e-05
End Leakage Inductance Le1 (H): 4.16861e-06
Spread Harmonic Inductance Ld1 (H): 4.65736e-06
Muture Slot Leakage Inductance Lsm (H): 0
Uniform Air-gap Magnetizing Inductance Lm (H): 0.000420378
D-axis Armature Reactive Inductance Lad (H): 0.000170667
Q-axis Armature Reactive Inductance Laq (H): 0.000389673
D-axis Armature synchronous Inductance Ld (H): 0.000199163
Q-axis Armature synchronous Inductance Lq (H): 0.00041817
NO-LOAD MAGNETIC DATA
Stator Tooth Flux Density (Tesla): 0.989849
Stator Yoke Flux Density (Tesla): 0.696649
Rotor Top-Tooth Flux Density (Tesla): 0.64764
Rotor Yoke Flux Density (Tesla): 0.603674
Magnet Flux Density (Tesla): 1.11121
Air-Gap Flux Density (Tesla): 0.552081
Stator Tooth Ampere Turns (A.T): 4.05178
Stator Yoke Ampere Turns (A.T): 4.47061
Rotor Top-Tooth Ampere Turns (A.T): 1.377
Rotor Yoke Ampere Turns (A.T): 1.80447
Magnet Ampere Turns (A.T): -542.69
Air-Gap Ampere Turns (A.T): 530.986
Total Ampere Turn Drop (A.T): 5.36602e-11
Leakage-Flux Factor: 1.45884
Saturation Factor: 1.02204
Correction Factor for Magnetic
Circuit Length of Stator Yoke: 0.719069
Correction Factor for Magnetic
Circuit Length of Rotor Yoke: 1
FULL-LOAD ELECTRIC DATA
Note:
This motor cannot offer the given rated output power.
The following results are of the maximum output.
Root-Mean-Square Armature Current (A): 474.617
Armature Thermal Load (A^2/mm^3): 1527.64
Specific Electric Loading (A/mm): 90.5245
Armature Current Density (A/mm^2): 16.8755
Frictional and Windage Loss (W): 0
Iron-Core Loss (W): 170.153
Armature Copper Loss (W): 3489.24
Transistor Loss (W): 0
Diode Loss (W): 0
Total Loss (W): 3659.39
Output Power (W): 114516
Input Power (W): 118176
Efficiency (%): 96.9034
Torque Angle (elec. degree): 120.6
Rated Speed (rpm): 5000
Rated Torque (N.m): 218.71
Fundamental RMS Phase Back-EMF (V): 60.3717
THD of Phase Back-EMF (%): 7.96601
TRANSIENT FEA INPUT DATA
For Stator Winding:
Number of Turns: 90
Parallel Branches: 6
Terminal Resistance (ohm): 0.00516324
End Leakage Inductance (H): 4.16861e-06
2D Equivalent Value:
Equivalent Model Depth (mm): 120
Equivalent Stator Stacking Factor: 0.95
Equivalent Rotor Stacking Factor: 0.95
老哥，你这个线径不对吧，特斯拉用的线是0.8的，而且，你这个槽满率严重超了 pat 发表于 2023-3-18 23:51
IPM ADJUSTABLE-SPEED SYNCHRONOUS MOTOR DESIGN
File: Setup1.res
槽满率，输出功率和转矩这些都不对
页:
[1]