ANSYS Workbench有限元分析工程实例详解》第18章
ANSYS Workbench有限元分析工程实例详解》第18章18.1中例子，第一次可以做出结果 ，可按刘老师写的调整电脑物理核心后再也算不出来结果了，附图片。 这是在另一台机器上做的例子，没修改过并行多核心设置，而到新机器上后，可以打开原来的结果，但如果重新计算则出不来计算结果。会出现“notset"提示，不知什么意思。 将所有设置重置也做不出来了，请求大神帮助。 worksheet 中出现以下信息：*** WARNING *** CP = 1.000 TIME= 14:58:20
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** NOTE *** CP = 1.062 TIME= 14:58:20
Distributed parallel processing has been temporarily disabled.
*****ANSYS SOLVE COMMAND*****
*** WARNING *** CP = 1.062 TIME= 14:58:20
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** NOTE *** CP = 1.250 TIME= 14:58:21
The model data was checked and warning messages were found.
Please review output or errors file (
C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11248_2\_ProjectScratch\Scr2
2AE9\file.err ) for these warning messages.
*** ANSYS - ENGINEERING ANALYSIS SYSTEMRELEASE Release 19.0 19.0 ***
DISTRIBUTED ANSYS Mechanical Enterprise
00865608VERSION=WINDOWS x64 14:58:21JUN 07, 2020 CP= 1.250
unsaved_project--Shape Optimization (A5)
*** WARNING *** CP = 1.281 TIME= 14:58:21
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** NOTE *** CP = 1.281 TIME= 14:58:21
Present time 0 is less than or equal to the previous time.Time will
default to 1.
*** NOTE *** CP = 1.281 TIME= 14:58:21
The step data was checked and warning messages were found.
Please review output or errors file (
C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11248_2\_ProjectScratch\Scr2
2AE9\file.err ) for these warning messages.
*** NOTE *** CP = 1.281 TIME= 14:58:21
The conditions for direct assembly have been met.No .emat or .erot
files will be produced. 文件中出现的警告如下：
*** WARNING *** CP = 7.938 TIME= 15:54:30
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 14.375 TIME= 15:54:33
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 14.375 TIME= 15:54:33
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 14.469 TIME= 15:54:33
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 20.938 TIME= 15:54:36
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 20.969 TIME= 15:54:36
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 21.062 TIME= 15:54:36
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 27.594 TIME= 15:54:40
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 27.594 TIME= 15:54:40
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 27.688 TIME= 15:54:40
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 34.094 TIME= 15:54:43
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 34.094 TIME= 15:54:43
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 34.188 TIME= 15:54:43
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 40.656 TIME= 15:54:46
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 40.656 TIME= 15:54:46
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 40.750 TIME= 15:54:46
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available.
*** WARNING *** CP = 47.266 TIME= 15:54:50
The Distributed ANSYS solution does not support topological
optimization.Distributed parallel processing will be deactivated for
this solution.
*** WARNING *** CP = 47.297 TIME= 15:54:50
Element shape checking is currently inactive.Issue SHPP,ON or
SHPP,WARN to reactivate, if desired.
*** WARNING *** CP = 47.359 TIME= 15:54:50
Material number 2 (used by element 13771 ) should normally have at
least one MP or one TB type command associated with it.Output of
energy by material may not be available. 我也遇到这种问题了 警告里提到形状优化模块不支持分布式计算，所以不要设置多核计算，按默认给的CPU数量计算试试吧 stanfod 发表于 2020-6-8 16:25
警告里提到形状优化模块不支持分布式计算，所以不要设置多核计算，按默认给的CPU数量计算试试吧
可默认CPU设置做也不行，不知是不是设置默认CPU时出了问题。重新安装软件都不行了。 The /CONFIG,NOELDB command is not valid in a Distributed ANSYS
solution.Command is ignored.
*GET_WALLSTRTFROMACTIITEM=TIME WALLVALUE=21.1341667
TITLE=
unsaved_project--Shape Optimization (A5) 不能保存是不是就无法读出来呢？ 这是在另一台机器上做的例子，没修改过并行多核心设置，而拷到新机器上后，可以打开原来结果，但如果重新计算则出不来计算结果。C:\Users\rmw\办**档 对这个问题研究了几天，发现最有可能是这个提示导致的，但不知如何解决。The /CONFIG,NOELDB command is not valid in a Distributed ANSYSsolution.Command is ignored.
为研究此问题，我在电脑中安装了16.0，在16.0中可以做出想要的结果，在提示中没有出现这个提示，两个版本中所有设置相同，变形、应力结果几乎相同，但19.0就不能显示优化后的形状，将两个版本计算时的worksheet对比发现19.0里多了个The /CONFIG,NOELDB command is not valid in a Distributed ANSYS solution.Command is ignored.还有就是19.0里面我将所有都设置为默认，也说是串行计算，可在计算时还是6个核都参加运算，Core Machine Name Working Directory
-----------------------------------------------------
0 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
1 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
2 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
3 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
4 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
5 rmw C:\Users\rmw\AppData\Local\Temp\WB_RMW_rmw_11828_2\_ProjectScratch\ScrC825
Latency time from master to core 1 = 2.287 microseconds
Latency time from master to core 2 = 2.360 microseconds
Latency time from master to core 3 = 2.381 microseconds
Latency time from master to core 4 = 3.097 microseconds
Latency time from master to core 5 = 2.245 microseconds
Communication speed from master to core 1 =5080.18 MB/sec
Communication speed from master to core 2 =5120.42 MB/sec
Communication speed from master to core 3 =4650.84 MB/sec
Communication speed from master to core 4 =5796.98 MB/sec
Communication speed from master to core 5 =5835.92 MB/sec
Total CPU time for main thread : 12.7 seconds
Total CPU time summed for all threads : 24.0 seconds
请高手指点一下是怎么回事，多谢多谢。 驴子少尉 发表于 2020-6-8 05:42
我也遇到这种问题了
你搞定没有？无法修改成串行计算了 abasim 发表于 2020-06-13 09:54
你搞定没有？无法修改成串行计算了
我感觉是模型那里有点问题，我一直没有解决，我的问题出现在谐响应分析模块，模型那里出现了半√符号。
页:
[1]