T_X 发表于 2018-10-2 16:47

模型自检时没问题，ANSYS仿真的过程中报错

Source setup is incorrect. Please make sure the sum of currents in each full winding must be zero in the both stationary moving region, respectively. The full winding is the complete physical winding without being reduced by master/slave and symmetry boundary.

wangshuoyu1995 发表于 2018-10-8 11:02

你的周期模型 把激励分割了？
页: [1]
查看完整版本: 模型自检时没问题，ANSYS仿真的过程中报错