koffer 发表于 2016-7-14 17:18

六分之一模型报错了……

感觉是二元边界条件的问题，但是怎么改都不行，主面和从面也挖了一个孔还是一个效果。
请各位大大帮忙看看，谢谢！

yttdays 发表于 2020-3-11 16:27

Unable to start the solver due to the following validation errors in the model which would generate incorrect results:

1. SAT component "Rotor core,Body#1" is not supported in 2D solver.
2. SAT component "stator back iron,Body#1" is not supported in 2D solver.
3. SAT component "stator tooth r,Body#1" is not supported in 2D solver.
4. SAT component "stator tooth iron l,Body#1" is not supported in 2D solver.
5. SAT component "stator air,Body#1" is not supported in 2D solver.
6. SAT component "stator air en,Body#1" is not supported in 2D solver.
7. SAT component "stator ext air,Body#1" is not supported in 2D solver.
8. SAT component "rotor air,Body#1" is not supported in 2D solver.
9. SAT component "rotor air en,Body#1" is not supported in 2D solver.
10. Problem 1: Invalid waveform type for circuit component "V1".
11. Problem 1: Invalid waveform type for circuit component "V2".
12. Problem 1: Invalid waveform type for circuit component "V3".

yttdays 发表于 2020-3-11 16:27

你这个好多问题，正好想问下楼主最后三个问题解决了吗？

If. 发表于 2020-3-24 10:25

最后三个好像要在线圈设置里改一下ACDC那个
页: [1]
查看完整版本: 六分之一模型报错了……