I need Speed (SPEED STUDIO)
本帖最后由 lijo 于 2009-2-10 01:42 编辑Who upload SPEED STUDIO?.
How use It.
Is CRC error normal in this file.
I need a long time.
SPEED SPEED SPEED Scottish Power Electronics and Electric Drives
http://www.speedlab.co.uk/products.html
At the work only have Flux 10.2 not maxwell 12.1
http://simol.cn/thread-11087-1-1.htmlCedrat.Flux.v10.2.WINNT2K-oDDiTy-ghp7850 0DAY: Cedrat.Flux.v10.2.WINNT2K-oDDiTy
All the info to run Flux 10.2:
http://simol.cn/thread-11460-1-1.html
moque (license.dat) and simwe.cn (flux_10.2_PC.exe)
http://simol.cn/thread-12827-1-1.html
All the info to run Maxwell 12.1:
ftp://simol:simol.cn@ftp.simol.cn/...
/Ansoft/Ansoft Maxwell v12.1.zip
/Ansoft/Ansoft simplorer V7
/ePhys20Winfinal.rar
http://staff.ee.sun.ac.za/pjrand ... l/Maxwell121Win.zip
http://simol.cn/thread-13030-1-1.html
http://simol.cn/thread-11816-1-1.html
BUT I WANT SPEED lijo,
One of my friend give me paper of design of PMSM.
pls see link
http://www.simol.cn/thread-13579-1-1.html
Is these paper from Speed group? lijo,
We now think that, Speed software Not available in your university?
Cedrat and speed both are consortium group.
Who is upload speed studio?
Is speed are very accurate calculation in motor sizing than maxwell rmxpert?
Pls. help.
Thanks again 我有speed motor design2007軟件,但沒有USB KEY所以無法使用! SPEED_training文件供參考,壓縮成6個檔案! SPEED_training.part2 SPEED_training.part3 奇怪怎麼老是傳失敗?SPEED_training.part4 SPEED_training.part5 {:1_428:}speed 好像很强大，但是就是没有人上传一个完整的版本。 SPEED_training.part6,上傳完畢! edward166,
请上传
谢谢兄弟 edward166,
super Thanks for training documents.
Pls. upload speed M design.
Awaiting your positive response
Thank again 此軟體要搭配安裝完成後並需再安裝USB KEY才能運轉,另外檔案總共235MB左右,請問要如何上傳? 再上傳一份日中文馬達快速設計與細部分析講義!共4檔 正上傳speed motor design2007至ftp://ftp.simol.cn,請自行去下載! 本帖最后由 lijo 于 2009-2-11 03:25 编辑
17# edward166
SUPERTHANKS FOR SHARING WITH US
You can copy or duplicate de USB Dongle?
help:
-----------------------------------------------------------------------------
From:eXetools
Poster:toro
hi all
this is a new generation of usb emulators, and is the result of cooperation of me and souz.
we used ms DSF (device simulation framework) as a base framework, DSF let developer to make usb simulated devices
as a COM based dll or exe. for more information see msdn.
in our emulator you can see DSF runtime,SoftUsbDongle.dll and TORO_SOUZ_RMSV8_EMULATOR.dll and USBEmulatorUtility.exe.
+ DSF runtime must be installed before installation and plug of dongles.
+ SoftUsbDongle.dll is usb request dispatcher.
+ USBEmulatorUtility.exe is the utility which can plug simulated dongles.
+ TORO_SOUZ_RMSV8_EMULATOR.dll is an actuall emualtor. it contain codes to emulate a usb sentinel superpro for SentinelLM v8 ( RMS V8 )
actually USBEmulatorUtility.exe search its folder to find dlls which their names start with "TORO_SOUZ_" string and try to plug them as usb dongles.
we already implimented such dlls for hasp4/hl,hasrdlock/sentinel supero pro and ultrapro and WIBU.
(souz made for novex/guadrant too) and we are working on MARX CRYPTO BOX usb dongles.
the main advantage of usage of DSF is compatibility with x86/X64 and vista windows, unfortunatelly it can not suport w9x and win2k ,we are working to add support for win2k.
however, as you know for each platform, code must be compiled agian.
the main disadvantage of DSF is need to manual plug/unplug. i wrote a service to plug dongles in system startup,
but it is not a perfect solution, waiting ms to release a more better version of DSF.
so for use our emulator,
run install.bat, it will install ms DSF runtime and will configure it for emulator usage.
each time you want to use emulator, you must run usbemulatorutility and press install button,
and you must not close utility untill finish of your work, becuase emulator is a dll and must be loaded
in the context of emulator utility, so after finish of work press uninstall button and then close utility.
for uninstallation of emulator simply run uninstall.bat
P.S. i protected my utility and emulator with winlicense, but i uncheked advanced debuger monitoring and registry/file monitoring. so you can use olly...
enjoy...
TORO
http://rapidshare.com/files/35712337/DSF_USB_EMULATOR.rar.html
-----------------------------------------------------------------------------
other:
{ www.perisoft.net -->http://rapidshare.com/files/167548001/bh505.rar "44940" password } --> very hard tool
TORO --> http://rapidshare.com/files/167548497/DSF_USB_EMULATOR.rar "3523800205" serial number
-----------------------------------------------------------------------------
The last is speed motor design2008(r2), 081007 20# lijo
不知道这个ｅｍｕｌａｔｏｒ如何适用？ edward166
SuperThanks for sharing.
Lijo,
Is it available of parallel port dongle emulators?
If yes pls. share.
Thanks brothers!