lijo 发表于 2009-2-7 16:59

I need Speed (SPEED STUDIO)

本帖最后由 lijo 于 2009-2-7 18:13 编辑

Who upload SPEED STUDIO?.
How use It.
Is CRC error normal in this file.
I need a long time.


SPEED SPEED SPEED Scottish Power Electronics and Electric Drives
http://www.speedlab.co.uk/products.html

guistar1983 发表于 2009-2-7 19:09

{:1_426:}我也希望找到这个软件。不知道是谁上传的？只传了一点点。

12qq21 发表于 2009-2-7 21:19

就是 没有上传完整！

zhuLwange 发表于 2009-2-8 12:14

lijo, If you have original installer from your universites you may share or upload so that any one of simol forum will provide/share crack file similar that last time you inform forum link of maxwell 12.1 .

Thanks brother for cooperation

lijo 发表于 2009-2-8 17:22

本帖最后由 lijo 于 2009-2-8 18:05 编辑

4# zhuLwange

At the university only have Flux 10.2 not maxwell 12.1
ftp Flux10.2 was removed by the moderators. http://simol.cn/thread-11087-1-1.htmlCedrat.Flux.v10.2.WINNT2K-oDDiTy-ghp7850 0DAY: Cedrat.Flux.v10.2.WINNT2K-oDDiTy

All the info to run Flux 10.2:

http://simol.cn/thread-11460-1-1.html
moque (license.dat) and simwe.cn (flux_10.2_PC.exe)
http://simol.cn/thread-12827-1-1.html

All the info to run Maxwell 12.1:

ftp://simol:simol.cn@ftp.simol.cn/...
/Ansoft/Ansoft Maxwell v12.1.zip
/Ansoft/Ansoft simplorer V7
/ePhys20Winfinal.rar
http://staff.ee.sun.ac.za/pjrand ... l/Maxwell121Win.zip
http://simol.cn/thread-13030-1-1.html
http://simol.cn/thread-11816-1-1.html



BUT I WANT SPEED

yheast 发表于 2009-2-8 18:59

强烈支持上传

y1949b 发表于 2009-2-8 23:42

这个软件据说确实蛮不错的

lijo 发表于 2009-2-9 06:58

本帖最后由 lijo 于 2009-2-9 07:01 编辑

7# y1949b

we can import speed studies / projects into Flux and into MotorCad,

SPEED is like the RmXprt to Maxwell
(Cedrat have 30 years and is use in the university, Ansoftis happy in mechatronica,covers much and now is ansys, awaiting view Fluent and Maxwell into ANSYSWORKBENCH?)

eelachan 发表于 2009-2-9 08:26

支持上傳SPEED我也需要SPEED

zhuLwange 发表于 2009-2-9 10:44

本帖最后由 zhuLwange 于 2009-2-9 10:45 编辑

lijo,
Speed software Not available in your university?
Cedrat and speed both are consortium group.
Who is upload speed studio?

Is speed are very accurate calculation in motor sizing than maxwell rmxpert?

Pls. help.
Thanks again

bhalkar 发表于 2009-2-9 11:23

speed studio found crc error

Pls. upload again.

lijo,
One of my friend give me paper of design of PMSM.
pls see link
http://www.simol.cn/thread-13579-1-1.html

Is these paper from Speed group?

funny 发表于 2009-2-9 18:56

好象那个就是原版的程序,不是破解程序,在找加密文件.
A:\BDCLOCK.002

lee001_78 发表于 2009-5-10 01:25

哎，什么时候能摆脱新手，达到十啊

qiuhans 发表于 2009-5-12 17:02

什么时候才能下载东西啊

carfieldfun 发表于 2009-5-22 12:27

上次在服务器上看到speed studio的文件夹，只是里面的没有破解全，后来被删掉了，哪位有的再发一下

cbb98 发表于 2009-7-3 20:07

支持楼上的观点,重发!

js4124 发表于 2010-6-4 13:17

希望有高手重新发上去，谢谢
页: [1]
查看完整版本: I need Speed (SPEED STUDIO)