moter 发表于 2014-7-20 15:55

FLUX 2D mechanical set问题

在进行样例设置后，进行 physics check 后出现下列问题是怎么回事？主要问题应该在第一句

The sliding lines of the mechanical set MS_ROTOR must form a circle
Concerned line(s) : 5 19 The mechanical set MS_ROTOR does not have an internal characteristic (inertia, frictions).
The internal friction losses torque will not be computedImpossible to solve problem
Edit : no existing entity can be applied for this command.

giuseppe 发表于 2014-7-21 06:50

按提示说的做
检查转子外轮廓是不是圆
机械属性设置的不全，有些值没有的要设置为0，看一下手册
页: [1]
查看完整版本: FLUX 2D mechanical set问题