skyscraper 发表于 2014-3-18 16:42

JMAG 电机建模

正在学习JMAG软件,关于电机仿真。
但是学习资料很少。有谁能发一份关于电机建模的资料吗?
利用JMAG自带的画图软件实现电机的建模。
我原来用UG画的电机模型导入后,没有体,只有面

lxfb1241 发表于 2014-3-20 21:23

3D模型用solidworks画,再导入JAMG比较好。

skyscraper 发表于 2014-3-21 13:34

lxfb1241 发表于 2014-3-20 21:23
3D模型用solidworks画,再导入JAMG比较好。

你好,我已经画好了图,导入后mesh出现下面的问题,我检查了SolidID:18(MatID:18),SolidID:40(MatID:40)两个PART,放大看,没有接触,请问如何解决啊?谢谢
There may be parts that interfere with the model
The model may have intersection.

CASE A. Mesh generation failed.
1. Please check for any conflicts between the following parts.
SolidID:18(MatID:18)
SolidID:40(MatID:40)
2. If there is a conflict, please resolve it.
3. If there are parts in contact with each other, make sure those parts are completely attached or leave a space between them.
4. If neither of the above works, try another healing option when reading the CAD file.
5. Please change the unit in JMAG to the original CAD data unit, and then import the data again.

CASE B. Mesh generation succeeded.
1. Please note that the geometry may have been modified automatically if the part that interferes with the model is large in volume.

skyscraper 发表于 2014-3-21 13:39

lxfb1241 发表于 2014-3-20 21:23
3D模型用solidworks画,再导入JAMG比较好。

能不能留个qq号,以后能随时请教

楼下小黑 发表于 2015-1-5 19:50

群里大神太多,同求人指导

梦君箫城 发表于 2015-1-27 13:58

同求呀!!感觉JMAG这方面的资料太少啦
页: [1]
查看完整版本: JMAG 电机建模